Pathway Outline
Date retreived
22/07/2026 6:11 PM AWST
22/07/2026 6:11 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Carpentry
SAL Kickstart Pre-Apprenticeship - Carpentry
Pathway
National Code
—
—
State Code
WB10
WB10
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
19/05/2011
19/05/2011
Field of Education
0403 - Building
0403 - Building
Approved Date
04/08/2009
04/08/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
1.00
1.00
Current Release Date
19/05/2011
19/05/2011
Nominal Hours
600
600
Description
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Carpentry Pathway WB10 and the CPC08 Construction, Plumbing and Services Integrated Framework Training Package qualification CPC20208.
Packaging Rules
1. CORE UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9435 | CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | 32 | Unit of competency |
| W9367 | CPCCCM1005A | Carry out measurements and calculations | 16 | Unit of competency |
| W9366 | CPCCCM1004A | Conduct workplace communication | 16 | Unit of competency |
| W9365 | CPCCCM1003A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| W9364 | CPCCCM1002A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
2. ELECTIVE UNITS
Complete 6 (six) units. The following is a sample program. The CPC08 Training Package should be consulted for further information on the selection of electives.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9375 | CPCCCM2006A | Apply basic levelling procedures | 16 | Unit of competency |
| W9337 | CPCCCA2001A | Handle carpentry materials | 16 | Unit of competency |
| W2073 | BCCCM2010B | Install trench support | 8 | Unit of competency |
| W9338 | CPCCCA2002A | Use carpentry tools and equipment | 52 | Unit of competency |
| W9411 | CPCCJN3001A | Use static machines | 25 | Unit of competency |
| W9368 | CPCCCM1006A | Work safely at heights | 16 | Unit of competency |
3. ADDITIONAL ELECTIVES
Students completing the requirements of additional units will receive Statements of Attainment for any additional units completed. Total hours for the program should not exceed 600. The CPC08 Training Package should be consulted for further information on the selection of electives.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9347 | CPCCCA3008A | Construct eaves | 20 | Unit of competency |
| W9346 | CPCCCA3007A | Construct pitched roofs | 36 | Unit of competency |
| W9339 | CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground | 32 | Unit of competency |
| W9345 | CPCCCA3006A | Erect roof trusses | 40 | Unit of competency |
| W9349 | CPCCCA3010A | Install and replace windows and doors | 32 | Unit of competency |
| W9352 | CPCCCA3013A | Install lining, panelling and moulding | 24 | Unit of competency |
| W9414 | CPCCJN3004A | Manufacture joinery components | 40 | Unit of competency |
4. WORK PLACEMENT MODULES
Complete all modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
No information
Note
This training program has been created as a pathway of the Training Package qualification CPC20208 Certificate II in Construction Pathways on 12 August 2010. Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
No information