Qualification Outline

Date retreived
22/07/2026 3:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Appliance Service

Certificate III in Appliance Service

Qualification
National Code:
UEE32111
State Code:
A101
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
17/04/2014
Approved Date
17/07/2012
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
920
Duration
2 Semesters
Current Release Number
4.00
Current Release Date
17/04/2014
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
4.00 17/04/2014 Current Transition (Replaced)
Description

Scope
This qualification provides competencies to set-up, service and repair electrical and refrigerated appliances with electives in gas appliances.
Note: The Ozone Protection and Synthetic Greenhouse Gas Legislation Amendment Bill 2003 apply to this qualification. Prior to planning the delivery of any training and/or assessment activities all legislative and regulatory requirements shall be identified and included.
^ From 1 July 2022 the elective units HLTAID001, HLTAID003 must no longer be delivered and will be replaced in the Packaging Rules by the units HLTAID009, HLTAID011 - for more information see: https://asqa.gov.au/news-events/news/reminder-about-superseded-hlt-first-aid-units

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All the Core competency standard units, and
- A combination of Elective competency standard units selected from Group A and/or Group B to achieve a total weighting of 220 points, and
- All the required pre-requisite competency standard units.

Group A Elective Units
- Units to be chosen to the total weighting of 100 points
- Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting in the Electrotechnology Training Package, their weighting will be 10 points.

Group B Elective Units
- All units may be chosen to the total weighting of 220 points
1. Core Units

All twenty two (22) units must be completed

State Code National Code Title Hours Type
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7431 UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply 18 Unit of competency
S7432 UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply 18 Unit of competency
s7429 UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring 54 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
s7425 UEENEEJ195A Establish the basic operating conditions of vapour compression systems - appliances 45 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
S7387 UEENEEJ154A Find and rectify faults in appliance control systems and devices 54 Unit of competency
S7386 UEENEEJ153A Find and rectify faults in motors and associated controls in refrigeration and air conditioning systems 45 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
S7430 UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures 18 Unit of competency
W7746 UEENEEC017B Participate in appliance servicing work and competency development activities 54 Unit of competency
W8180 UEENEEK042A Participate in environmentally sustainable work practices 18 Unit of competency
S7338 UEENEEJ102A Prepare and connect refrigerant tubing and fittings 27 Unit of competency
S7394 UEENEEJ162A Recover, pressure test, evacuate, charge and leak test refrigerants - appliances 45 Unit of competency
S7389 UEENEEJ156A Service clothes washing machines and dryers 36 Unit of competency
S7388 UEENEEJ155A Service refrigeration appliances 54 Unit of competency
S7385 UEENEEJ151A Service small electrical appliances and power tools 54 Unit of competency
W7805 UEENEEE003B Solve problems in extra-low voltage single path circuits 36 Unit of competency
S7424 UEENEEJ194A Solve problems in low voltage refrigeration circuits 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
S8393 UEENEEJ161A Verify functionality and compliance of appliances 18 Unit of competency
2. Group A Imported and Common Elective Units

Units may be chosen from this group to a total of weighting of 100 points.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
WG730 HLTAID001 Provide cardiopulmonary resuscitation 3 Unit of competency
WG732 HLTAID003 Provide first aid 20 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
W7759 UEENEED001B Use basic computer applications relevant to a workplace 18 Unit of competency
W9434 CPCCOHS1001A Work safely in the construction industry 4 Unit of competency
3. Group B Elective Units

All units may be chosen from this group to a total of weighting of 220 points.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
S7414 UEENEEJ184A Apply safety awareness and legal requirements for carbon dioxide refrigerant 9 Unit of competency
S7404 UEENEEJ174A Apply safety awareness and legal requirements for hydrocarbon refrigerants 9 Unit of competency
S7340 UEENEEJ104A Establish the basic operating conditions of air conditioning systems 18 Unit of competency
S7418 UEENEEJ188A Repair and service self contained carbon dioxide refrigeration and heat pump systems 18 Unit of competency
S7354 UEENEEJ118A Resolve problems in post mix refrigeration systems 18 Unit of competency
S7401 UEENEEJ171A Resolve problems in refrigerated beverage vending cabinets 18 Unit of competency
S7403 UEENEEJ173A Service and repair microwave ovens 36 Unit of competency
S7405 UEENEEJ175A Service and repair self contained hydrocarbon air conditioning and refrigeration systems 18 Unit of competency
S7391 UEENEEJ158A Service dishwasher machines 36 Unit of competency
S7390 UEENEEJ157A Service electrical heating appliances 54 Unit of competency
S7392 UEENEEJ159A Service gas heating appliances 36 Unit of competency
S7419 UEENEEJ189A Service room air conditioners 27 Unit of competency
Replaces
State Code National Code Title Type
W428 UEE30507 Certificate III in Appliance Servicing Qualification
W828 UEE30510 Certificate III in Appliance Servicing Qualification
Replaced By
State Code National Code Title Type
BFL2 UEE32120 Certificate III in Appliance Service Qualification
No information
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
(AP02050) ELECTRICAL APPLIANCE SERVICEPERSON Apprenticeship

Part-time is defined as a minimum of 20 hours per week.