Qualification Outline
22/07/2026 5:35 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Split Air Conditioning and Heat Pump Systems
Certificate II in Split Air Conditioning and Heat Pump Systems
UEE20120
BFP0
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 3.00 | 20/12/2022 | Current | Approved |
| 2.00 | 23/03/2022 | Replaced | Approved |
| 1.00 | 05/10/2020 | Replaced | Approved |
Description
This qualification covers competencies to install, commission and decommission single head, split air conditioning and heat pumps systems to a prescribed routine where the maximum plant capacity for each system does not exceed 18 kilowatt (kW) refrigeration.
This includes wall hung, floor and ceiling suspended, cassette and ducted fan coil split systems and water heating heat pump systems. This qualification excludes competencies required for service, repair, maintenance, diagnostic/fault finding and electrical work or the safe and proper installation of commercial refrigeration, air conditioning and heat pump plant and equipment.
Relevant employment may be required to enable the application of the required knowledge and skills to on the job work activities and environments.
Refrigerant Handling Licence:
The qualification meets only the training components for a national restricted heat pump, split system, installation and decommissioning Refrigerant Handling Licence, which is required to work on equipment that carries the risk of a fluorocarbon refrigerant being emitted while decanting the refrigerant, installing, commissioning or decommissioning refrigeration and air conditioning equipment.
Refrigeration and Air Conditioning Occupational Licence:
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to refrigeration/air conditioning work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Schedule
Packaging Rules
A total of 370 weighting points comprising:- 350 core weighting points listed below; plus
- twenty (20) general elective weighting points from the general elective units listed below.
Up to twenty (20) weighting points of the general elective units, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed, weighting points will be ten (10) points, unless directed from the Electrotechnology Industry Reference Committee (IRC).
There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol * on training.gov.au. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.
Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
1. Core Units
All core units must be completed.
2. Imported and Common Elective Units
Up to 20 weighting points may be chosen from the Imported and Common Elective Units listed below.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D632 | UEE20111 | Certificate II in Split Air-conditioning and Heat Pump Systems | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships