Qualification Outline
Date retreived
22/07/2026 1:07 AM AWST
22/07/2026 1:07 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Gas Industry Operations
Certificate III in Gas Industry Operations
Qualification
National Code:
UEG30110
UEG30110
State Code:
W991
W991
TGA Status:
Deleted
Deleted
DTWD Status:
Deleted
Deleted
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
24/04/2006
Approved Date
01/11/2012
Stream of Study
Operatives (3100)
VET Act Classifier
B
Nominal Hours
540
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
24/04/2006
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 24/04/2006 | Current | Approved |
Description
Not Applicable
Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:- All eight (8) core units, and
- A combination of elective units to achieve a total weighting of 460 points:
- A maximum of 140 weighting points may be chosen from Group A Imported and Common Elective Units
- A minimum of 320 to a maximum of 460 weighting points to be chosen from Group B Elective Units
- All the required pre-requisite competency standard units have been met as required.
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3 or higher. If units have not being assigned a weighting in the Gas Industry Training Package, their weighting will be 10 points.
1. Core Units
All eight (8) core units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S5304 | UEGNSG102A | Carry out work activities in a utilities industry work environment | 60 | Unit of competency |
| S5306 | UEGNSG104A | Comply with environmental policies and procedures | 40 | Unit of competency |
| S5305 | UEGNSG103A | Comply with workplace OHS procedures and practices | 40 | Unit of competency |
| D0712 | BSBFLM303C | Contribute to effective workplace relationships | 30 | Unit of competency |
| D0717 | BSBFLM312B | Contribute to team effectiveness | 30 | Unit of competency |
| S5307 | UEGNSG105A | Establish the work site | 40 | Unit of competency |
| D1028 | BSBWOR301A | Organise personal work priorities and development | 30 | Unit of competency |
2. Group A Imported and Common Elective Units
Units may be chosen to a maximum of 140 weighting points from Group A.
Please refer to the Training Package for the full details of available units
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7804 | UEENEEE002B | Dismantle, assemble and fabricate electrotechnology components | 36 | Unit of competency |
| S5668 | TLIC407D | Drive heavy rigid vehicle | 40 | Unit of competency |
| S5674 | TLID1007C | Operate a forklift | 40 | Unit of competency |
| D0749 | BSBINM201A | Process and maintain workplace information | 20 | Unit of competency |
| C3529 | BSBCMN209A | Provide information to clients | 20 | Unit of competency |
| D3645 | UEENEEM080A | Report on the integrity of explosion-protected equipment in a hazardous area | 18 | Unit of competency |
| D3641 | UEENEEM076A | Use and maintain the integrity of a portable gas detection device | 18 | Unit of competency |
| W7809 | UEENEEE007B | Use drawings, diagrams, schedules and manuals | 36 | Unit of competency |
3. Group B Elective Units
A minimum of 320 to a maximum of 460 weighting points to be chosen from Group B.
Please refer to the Training Package for the full details of available units
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S4843 | UEGNSG301A | Coat gas pipelines | 40 | Unit of competency |
| S4834 | UEGNSG203A | Commission and decommission gas distribution pipelines | 60 | Unit of competency |
| S4824 | UEGNSG107A | Control gas odourisation | 40 | Unit of competency |
| S4847 | UEGNSG305A | Coordinate gas transmission pipeline repair and modifications | 80 | Unit of competency |
| S4823 | UEGNSG106A | Coordinate repair of pipeline, facilities and equipment | 40 | Unit of competency |
| S4832 | UEGNSG201A | Excavate for underground utilities services operating plant and equipment | 40 | Unit of competency |
| S4869 | UEGNSG604A | Fill gas cylinders | 20 | Unit of competency |
| S4842 | UEGNSG211A | Lay underground electrical supply cables | 45 | Unit of competency |
| S4849 | UEGNSG307A | Perform routine maintenance on transmission pipeline facilities and equipment | 60 | Unit of competency |
| S4872 | UEGNSG607A | Process LPG | 20 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S495 | UEG30106 | Certificate III in Gas Industry Operations | Qualification |
VET Info Notes
THIS QUALIFICATION HAS BEEN DELETED in Version 1 of the UEG11 Gas Industry Training Package - NO REPLACEMENT.
Entry Requirements
Not Applicable
Traineeships and Apprenticeships
