Qualification Outline
22/07/2026 6:32 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate IV in Electrical Equipment and Systems
Certificate IV in Electrical Equipment and Systems
UEE43011
A152
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 4.00 | 17/04/2014 | Current | Approved |
Description
Scope
This qualification provides competencies to manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a plant or machinery. An electrical fitter is not authorised to install any electrical wiring systems within an electrical installation as prescribed by definitions contained in AS/NZS 3000.
Electrical equipment means any appliance, article, accessory, wire, fitting, cable, conduit or apparatus that generates, uses, conveys or controls (or that is intended to generate, use, convey or control) electricity above extra low voltage.
^ From 1 July 2022 the elective unit HLTAID001 must no longer be delivered and will be replaced in the Packaging Rules by the unit HLTAID009 - for more information see: https://asqa.gov.au/news-events/news/reminder-about-superseded-hlt-first-aid-units
Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:- Nineteen (19) core units and
- A combination of elective units to achieve a total weighting of 420 points:
- A maximum of 60 weighting points may be chosen from Group A Imported and Common Elective Units
- A maximum of 200 weighting points may be chosen from Group B Elective Units
- A minimum of 220 to a maximum of 420 weighting points to be chosen from Group C Elective Units
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
Note: UEENEEG199A - Those holding and ‘Electrical Fitter Licence or equivalent issued in an Australian State or Territory’ meets the requirements of this unit and its pre-requisite requirements
1. Core Units
All nineteen (19) units must be completed
2. Group A Imported and Common Elective Units
Units may be chosen to a maximum of 60 weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7811 | UEENEEE009B | Comply with scheduled and preventative maintenance program processes | 18 | Unit of competency |
| W7740 | UEENEEC010B | Deliver a service to customers | 18 | Unit of competency |
| W7731 | UEENEEC001B | Maintain documentation | 18 | Unit of competency |
| W7822 | UEENEEE020B | Provide basic instruction in the use of electrotechnology apparatus | 18 | Unit of competency |
| WG730 | HLTAID001 | Provide cardiopulmonary resuscitation | 3 | Unit of competency |
| W7733 | UEENEEC003B | Provide quotations for installation or service jobs | 18 | Unit of competency |
| W7732 | UEENEEC002B | Source and purchase material/parts for installation or service jobs | 18 | Unit of competency |
| WC385 | UEENEED101A | Use computer applications relevant to a workplace | 18 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
3. Group B Elective Units
Units may be chosen to a maximum of 200 weighting points from Group B.
Please refer to the Training Package for the full list of unit weighting points.
4. Group C Elective Units
A minimum of 220 to a maximum of 420weighting points to be chosen from Group C.
Please refer to the Training Package for the full list of unit weighting points.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFM2 | UEE43020 | Certificate IV in Electrical Equipment and Systems | Qualification |
No information
Entry Requirements
Not applicable.
Traineeships and Apprenticeships