Qualification Outline

Date retreived
22/07/2026 7:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Winding and Assembly

Certificate II in Winding and Assembly

Qualification
National Code:
UEE20411
State Code:
A102
TGA Status:
Deleted
DTWD Status:
Deleted
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
17/04/2014
Approved Date
23/10/2013
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
324
Duration
1 Semester
Current Release Number
3.00
Current Release Date
17/04/2014
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
3.00 17/04/2014 Current Approved
Description

Scope
This qualification provides competencies to wind, place and connect coils for small armatures, transformers and solenoids following prescribed routines.

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- Seven (7) core units and
- A combination of elective units to achieve a total weighting of 160 points:
- A maximum of sixty (60) weighting points may be chosen from Group A Impoted and Common Elective Units
- A minimum of 100 to a maximum of 160 weighting points may be chosen from Group B Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 2. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
1. Core Units

All seven (7) units must be completed

State Code National Code Title Hours Type
WC711 UEENEEK142A Apply environmentally and sustainable procedures in the energy sector 18 Unit of competency
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
W7839 UEENEEE038B Participate in development and follow a personal competency development plan 18 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
WC494 UEENEEG150A Wind electrical coils 36 Unit of competency
2. Group A Imported and Common Elective Units

Units may be chosen to a maximum of sixty (60) weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
WG730 HLTAID001 Provide cardiopulmonary resuscitation 3 Unit of competency
W7738 UEENEEC008B Receive and store materials and equipment for electrotechnology work 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
3. Group B Elective Units

A minimum of 100 to a maximum of 160 weighting points to be chosen from Group B.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC473 UEENEEG111A Carry out basic repairs to electrical components and equipment 36 Unit of competency
WC427 UEENEEE122A Carry out preparatory energy sector work activities 54 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC495 UEENEEG151A Place and connect electrical coils 36 Unit of competency
WC532 UEENEEH102A Repairs basic electronic apparatus faults by replacement of components 36 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
Replaces
State Code National Code Title Type
W407 UEE20407 Certificate II in Winding and Assembly Qualification
No information
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
(TR08920) WINDING AND ASSEMBLY (LEVEL 2) Traineeship

Part-time is defined as a minimum of 20 hours per week.