Qualification Outline

Date retreived
22/07/2026 8:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Joinery

Certificate III in Joinery

Qualification
National Code:
CPC31908
State Code:
W595
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
19/05/2011
Approved Date
09/12/2009
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
775
Duration
4 Semesters
Current Release Number
1.00
Current Release Date
19/05/2011
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 19/05/2011 Current Approved
Description
Schedule
Packaging Rules
30 units of competency are required for award of the qualification:
16 compulsory units plus
14 elective units

A maximum of two of the fourteen required elective units may be substituted by selecting relevant units of competency from and Certificate III or IV construction qualification or qualification in another endorsed Training Package
1. Compulsory Units

All 11 units must be completed

State Code National Code Title Hours Type
W9435 CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry 32 Unit of competency
W9362 CPCCCA3023A Carry out levelling operations 24 Unit of competency
W9367 CPCCCM1005A Carry out measurements and calculations 16 Unit of competency
W9366 CPCCCM1004A Conduct workplace communication 16 Unit of competency
W9337 CPCCCA2001A Handle carpentry materials 16 Unit of competency
W9365 CPCCCM1003A Plan and organise work 16 Unit of competency
W9370 CPCCCM2001A Read and interpret plans and specifications 32 Unit of competency
W9338 CPCCCA2002A Use carpentry tools and equipment 52 Unit of competency
W9376 CPCCCM2007A Use explosive power tools 8 Unit of competency
W9364 CPCCCM1002A Work effectively and sustainably in the construction industry 16 Unit of competency
W9368 CPCCCM1006A Work safely at heights 16 Unit of competency
2. Compulsory Units - Joinery (machining and component manufacture and assembly) Field of Work

All 5 units must be completed

State Code National Code Title Hours Type
W9413 CPCCJN3003A Manufacture components for door and window frames and doors 22 Unit of competency
W9414 CPCCJN3004A Manufacture joinery components 40 Unit of competency
W9515 CPCCSH3001A Set out and assemble cabinets, showcases, wall units, counters and workstations 32 Unit of competency
W9412 CPCCJN3002A Use computer-controlled machinery 32 Unit of competency
W9411 CPCCJN3001A Use static machines 25 Unit of competency
3. Elective Units

14 units to be completed

The elective units listed are ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options.

State Code National Code Title Hours Type
W9518 CPCCSH3004A Apply finishes 16 Unit of competency
W9418 CPCCJS3003A Assemble and install stairs 12 Unit of competency
W9408 CPCCJN2001A Assemble components 32 Unit of competency
W9340 CPCCCA3001A Carry out general demolition of minor building structures 24 Unit of competency
W9555 CPCCST2005A Carry out load slinging of off-site materials 4 Unit of competency
W9421 CPCCJS3006A Construct fabricated stairs 24 Unit of competency
W9355 CPCCCA3016A Construct timber external stairs 40 Unit of competency
W9351 CPCCCA3012A Frame and fit wet area fixtures 24 Unit of competency
W9349 CPCCCA3010A Install and replace windows and doors 32 Unit of competency
W9352 CPCCCA3013A Install lining, panelling and moulding 24 Unit of competency
W9417 CPCCJS3002A Manufacture stair components for straight flighted stairs 20 Unit of competency
W9504 CPCCSF2004A Place and fix reinforcement materials 40 Unit of competency
W9409 CPCCJN2002A Prepare for off-site manufacturing process 32 Unit of competency
W9470 CPCCPD3001A Prepare surfaces for painting 56 Unit of competency
Replaces
State Code National Code Title Type
1444 51526 Certificate III in Joinery (Housing) Accredited course
N061 BCF30200 Certificate III in Off-Site Construction (Joinery-Timber/Aluminium/Glass) Qualification
Replaced By
State Code National Code Title Type
D408 CPC31911 Certificate III in Joinery Qualification
VET Info Notes
1. This training program is a representation of qualification code CPC31908, taken from the Construction and Plumbing and Integrated Framework Services training package CPC08, which should be consulted for its full requirements.

2. The proponent and copyright holder is DEEWR.

3. Further information on this program may be obtained from the NTIS website.

4. The program outline has been entered on to STARS by VET Teaching & Learning, Dept Training & Workforce Development WA, on 9/12/2009.
Entry Requirements
No information
Traineeships and Apprenticeships
(AP02000) JOINER Apprenticeship