Qualification Outline

Date retreived
23/07/2026 2:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate IV in ESI Generation Maintenance (Mechanical)

Certificate IV in ESI Generation Maintenance (Mechanical)

Qualification
National Code:
UEP40306
State Code:
S505
TGA Status:
Deleted
DTWD Status:
Deleted
National Endorsed, State Implementation and Classification
Field of Education
0399 - Other Engineering And Related Technologies
Original TGA Release Date
07/11/2006
Approved Date
07/05/2008
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
980
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
07/11/2006
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 07/11/2006 Current Approved
Description

Not Applicable

Schedule
Packaging Rules
The requirements for granting this qualification is the successful completion:

1. All the Core Units (no weighting points attached to Core Units), and
2. Five (5) of the seven (7) nominated Stream Core Units (no weighting points attached to Stream Core Units). Unit/s not selected as Stream Core could be used as Electives, and
3. Any combination of Elective Units from Schedules 3, 4 and 5 detailed in the Schedule of Electives within this Qualification Structure where the sum of the weighting value is no less than 600 points, (with a minimum of 300 weighting points drawn from Schedule), or
4. Imported Units from any other Training Package at a similar AQF level qualification. Imported units must be approved and valued by the National Generation Training group in order for them to contribute to the required 600 points, and
5. All Prerequisite requirements (no weighting points) including a relevant trade certificate.

Note:
- Schedules 3, 4, and 5 forms an integral part of this qualification
- Only Core and Stream Core Units can be recognised when they appear as Core or Stream Core in another qualification
- No provision exists for the double counting of Core and Stream Core Units as Elective Unit points towards a second qualification
- Once an Elective Unit of Competence has been achieved and the points gained have been counted towards a qualification the points cannot be used again to contribute towards any other qualification.
1. Core Units

The requirements for granting this qualification is the successful completion:

1. All the Core Units (no weighting points attached to Core Units), and
2. Five (5) of the seven (7) nominated Stream Core Units (no weighting points attached to Stream Core Units). Unit/s not selected as Stream Core could be used as Electives, and
3. Any combination of Elective Units from Schedules 3, 4 and 5 detailed in the Schedule of Electives within this Qualification Structure where the sum of the weighting value is no less than 600 points, (with a minimum of 300 weighting points drawn from Schedule), or
4. Imported Units from any other Training Package at a similar AQF level qualification. Imported units must be approved and valued by the National Generation Training group in order for them to contribute to the required 600 points, and
5. All Prerequisite requirements (no weighting points) including a relevant trade certificate.

Note:
- Schedules 3, 4, and 5 forms an integral part of this qualification
- Only Core and Stream Core Units can be recognised when they appear as Core or Stream Core in another qualification
- No provision exists for the double counting of Core and Stream Core Units as Elective Unit points towards a second qualification
- Once an Elective Unit of Competence has been achieved and the points gained have been counted towards a qualification the points cannot be used again to contribute towards any other qualification.

Core Units - All required

State Code National Code Title Hours Type
S5223 UEPOPS337A Maintain Quality Systems Within the Team 60 Unit of competency
S5260 UEPOPS417A Monitor and Implement Environmental Plans and Procedures 40 Unit of competency
S5244 UEPOPS401A Monitor Compliance with Occupational Health and Safety Policy and Procedures 40 Unit of competency
S5149 UEPOPS203A Operate and Monitor Communications System 50 Unit of competency
2. Stream Core Units

Stream Core Units - Must have 5 ot 7 Units

State Code National Code Title Hours Type
S5111 UEPMNT402A Conduct Complex Levelling and Alignment 60 Unit of competency
S5130 UEPMNT421A Conduct Technical Inspection of Process Plant and Equipment 90 Unit of competency
S5224 UEPOPS338A Facilitate Effective Workplace Communication 50 Unit of competency
S5110 UEPMNT401A Install and Maintain Complex Mechanical Seals 40 Unit of competency
S5113 UEPMNT404A Maintain Complex Mechanical Pumps 40 Unit of competency
S5112 UEPMNT403A Maintain Complex Mechanical Valves 40 Unit of competency
S5281 UEPOPS439A Plan and Organise Work 40 Unit of competency
VET Info Notes
This training program is a representation of the qualification code UEP40306 taken from the ESI Generation Training Package UEP06 which should be consulted for full description of requirements.

1. This qualification is the copyright of The Department of Education, Science and Training (DEST).

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS on 7/5/2008.
Entry Requirements

Not Applicable

Traineeships and Apprenticeships
(TR08510) ESI GENERATION (MECHANICAL) (LEVEL 4) Traineeship

Part-time is defined as a minimum of 20 hours per week.