Unit of competency Outline

Date retreived
22/07/2026 2:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Create drawings for manufactured textile products

Create drawings for manufactured textile products

Unit of competency
National Code
MSTTF3009
State Code
OEZ31
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/12/2022
View on TGA
State Implementation and Classification
Approved Date
03/07/2023
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
03/07/2023
Nominal Hours
70
Description
This unit describes the skills and knowledge required to translate product, customer and site information into detailed drawings for costing and production purposes.This unit applies individuals working in accordance with established procedures, using discretion, judgement and problem solving to review and manipulate information from varied sources. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Gather information
  • 1.1 Review existing information about site and product requirements and identify additional information needs
  • 1.2 Seek required additional information from relevant people
  • 1.3 Locate and interpret technical information about required products, materials, equipment and operating features
2. Interpret information and obtain dimensions
  • 2.1 Review existing measurements and use scaling techniques to obtain dimensions needed for production
  • 2.2 Accurately calculate and record surface areas and angles
  • 2.3 Identify and determine geometric shapes, establish positions of clear panels and record information
3. Identify components, products and services
  • 3.1 Develop concept drawing of completed product or service based on information provided
  • 3.2 Determine required accessories, attachments and other components from information provided
  • 3.3 Determine anchor points, and types and sizes of openings
  • 3.4 Identify potential difficulties or hazards associated with product manufacture or installation
  • 3.5 Identify environmental and regulatory features which may affect the product or service to be provided
4. Define detailed customer requirements in graphic form
  • 4.1 Accurately transfer dimensions and angles on to the sketch or diagram
  • 4.2 Incorporate clear and accurate details of all required product features
  • 4.3 Calculate and incorporate dimensional allowances for cutting, rolled edges, joins and reinforcements
  • 4.4 Make provision for seams, joins and overlaps and confirm accuracy of all dimensions and angles
  • 4.5 Incorporate or create supporting information about specific environmental, regulatory or operational requirements
5. Finalise information
  • 5.1 Review and confirm accuracy and completeness of all graphic information prepared and prepare final information
  • 5.2 Communicate information to client or work colleagues responsible for further action based on job requirements
No information
No information
Replaces
State Code National Code Title Type
BAU62 MSTTF2006 Measure and scale geometric shapes Unit of competency
BAU64 MSTTF2005 Translate information into measurements or diagrams Unit of competency