Unit of competency Outline

Date retreived
23/07/2026 12:54 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform chemical tests and procedures

Perform chemical tests and procedures

Unit of competency
National Code
MSL974019
State Code
OAC78
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
20/07/2018
View on TGA
State Implementation and Classification
Approved Date
29/11/2018
Field of Education
019909 - Laboratory Technology
Original Release Date
29/11/2018
Nominal Hours
60
Description
This unit of competency describes the skills and knowledge to interpret chemical test requirements, prepare samples, conduct pre-use and calibration checks on equipment and perform routine chemical tests. These tests will involve several measurement steps. The unit includes basic data processing and interpretation of results.This unit applies to laboratory or technical assistants and instrument operators in all industry sectors.No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1 Interpret and schedule test requirements
  • 1.1 Review test request to identify samples to be tested, test method and equipment and instruments involved
  • 1.2 Identify hazards and workplace control measures associated with the sample, preparation and test methods, reagents and/or equipment
  • 1.3 Plan work sequences to optimise throughput of multiple samples
2 Receive and prepare samples
  • 2.1 Log samples using standard operating procedures (SOPs)
  • 2.2 Record sample description, compare with specification and note and report discrepancies
  • 2.3 Prepare samples and standards in accordance with chemical testing requirements
3 Check equipment before use
  • 3.1 Set up equipment and instruments in accordance with test method requirements
  • 3.2 Perform pre-use and safety checks in accordance with relevant workplace and operating procedures
  • 3.3 Check equipment calibration using specified standards and procedures
  • 3.4 Inspect reagents required for quality issues including visual checks and expiry
  • 3.5 Maintain equipment log in accordance with workplace procedures
4 Test samples to determine chemical species or properties
  • 4.1 Operate equipment and instruments in accordance with test method requirements
  • 4.2 Perform tests or procedures on all samples and standards in accordance with specified methods
  • 4.3 Shut down equipment and instruments in accordance with operating procedures
5 Process and interpret data
  • 5.1 Record test data noting atypical observations and anomalies
  • 5.2 Construct calibration graphs and compute results for all samples from these graphs
  • 5.3 Check calculated values for consistency with expectations
  • 5.4 Record and report results in accordance with workplace procedures
  • 5.5 Determine if obvious procedure or equipment problems have led to atypical data or results
6 Maintain a safe work environment
  • 6.1 Use established safe work practices and personal protective equipment (PPE) to ensure personal safety and that of other laboratory personnel
  • 6.2 Minimise the generation of wastes and environmental impacts
  • 6.3 Safely collect and dispose of laboratory and hazardous waste
  • 6.4 Care for and store equipment and reagents as required
7 Maintain laboratory records
  • 7.1 Record entries on report forms or into a laboratory information management system accurately calculating, recording or transcribing data as required
  • 7.2 Ensure traceability of sample from receipt to reporting of results
No information
No information
Replaces
State Code National Code Title Type
AWO09 MSL974003 Perform chemical tests and procedures Unit of competency
Replaced By
State Code National Code Title Type
OEX97 MSL974032 Perform chemical tests and procedures Unit of competency
State Code National Code Title Type
BGK1 RII40720 Certificate IV in Civil Construction Qualification
AZF5 RII40815 Certificate IV in Civil Construction Design Qualification
BGL3 RII40820 Certificate IV in Civil Construction Design Qualification
AZA5 RII40615 Certificate IV in Civil Construction Operations Qualification
AZC9 RII40715 Certificate IV in Civil Construction Supervision Qualification
BEA9 MSS40218 Certificate IV in Environmental Monitoring and Technology Qualification
BEA8 MSS50218 Diploma of Environmental Monitoring and Technology Qualification
BIR2 MSS40222 Certificate IV in Environmental Monitoring and Technology Qualification
BIR0 MSS50222 Diploma of Environmental Monitoring and Technology Qualification
BFU6 DEF40320 Certificate IV in Explosive Ordnance Operations Qualification
BFU3 DEF50320 Diploma of Explosives Qualification
BHA7 FBP30121 Certificate III in Food Processing Qualification
BEF2 FBP40418 Certificate IV in Food Science and Technology Qualification
BGZ0 FBP40421 Certificate IV in Food Science and Technology Qualification
BHJ3 UEG40221 Certificate IV in Gas Supply Industry Operations Qualification
BGX6 UEG50120 Diploma of Gas Supply Industry Operations Qualification
BIL6 UEG40222 Certificate IV in Gas Supply Industry Operations Qualification
BGK8 UEG40220 Certificate IV in Gas Supply Industry Operations Qualification
BDV2 MSL60118 Advanced Diploma of Laboratory Operations Qualification
BDV6 MSL30118 Certificate III in Laboratory Skills Qualification
BDV3 MSL40118 Certificate IV in Laboratory Techniques Qualification
BDV4 MSL50118 Diploma of Laboratory Technology Qualification
BAM7 MSM40116 Certificate IV in Process Manufacturing Qualification