Unit of competency Outline

Date retreived
23/07/2026 1:54 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform routine maintenance on security equipment and systems

Perform routine maintenance on security equipment and systems

Unit of competency
National Code
CPPSEC2026
State Code
OBJ01
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/09/2019
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
099905 - Security Services
Original Release Date
20/05/2020
Nominal Hours
30
Description
This unit specifies the skills and knowledge required to perform routine maintenance, adjustments and permitted repairs on a range of security equipment and systems. It includes finding faults and using tools and equipment to maintain the correct operation of security equipment and systems.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Licensing, legislative or certification requirements apply to advising on, supplying, installing, maintaining, monitoring, repairing and servicing security equipment in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Plan and prepare for routine maintenance.
  • 1.1 Review work instructions to confirm routine maintenance timeframes, equipment location and required maintenance in consultation with relevant persons.
  • 1.2 Review and follow workplace policies and procedures including work health and safety to comply with regulatory requirements when carrying out work tasks.
  • 1.3 Select and organise required tools and equipment including personal protective equipment and check for safe and correct operation.
  • 1.4 Discuss planned maintenance procedures with relevant persons to clarify needs and expectations.
  • 1.5 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 1.6 Inspect work area to identify and control or report risks and hazards.
2 Conduct routine maintenance procedures.
  • 2.1 Use safe work practices when working with electronic equipment and cables according to WHS requirements.
  • 2.2 Access security equipment and system requiring maintenance with minimal disruption to services and others in the work area.
  • 2.3 Inspect and assess security equipment and system operation against normal operating criteria.
  • 2.4 Carry out routine maintenance procedures on security equipment and system according to manufacturers’ instructions and WHS requirements.
  • 2.5 Identify faults and undertake permitted routine repairs according to manufacturers’ instructions and WHS requirements.
  • 2.6 Identify and report complex faults or repair requirements to relevant persons.
3 Complete routine maintenance and documentation.
  • 3.1 Reinstate serviced and repaired security equipment and system to operational condition.
  • 3.2 Notify completion of maintenance work to relevant persons.
  • 3.3 Complete service documentation according to workplace and regulatory requirements.
  • 3.4 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 3.5 Restore work area to original condition and remove waste caused by maintenance tasks.
No information
No information
Replaces
State Code National Code Title Type
D1401 CPPSEC2026A Perform routine maintenance on security equipment and system Unit of competency