Qualification Outline

Date retreived
22/07/2026 7:22 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Technical Security

Certificate II in Technical Security

Qualification
National Code:
CPP20326
State Code:
BTT9
TGA Status:
Current
DTWD Status:
Approved
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
04/02/2026
Approved Date
31/03/2026
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
267
Duration
1 Semester
Current Release Number
1.00
Current Release Date
04/02/2026
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
1.00 04/02/2026 Current Approved
Description

This is a qualification for security technicians who sell, install, repair, service and maintain security equipment and systems that protect people and property and prevent or minimise loss and damage.
Technicians at this level operate under general supervision and interact with clients to perform installation, repair, service and maintenance tasks at client premises. Occupational titles may include:
access control technician
installation technician
security salesperson
service technician.
Licensing, legislative or certification requirements apply to advising on, supplying, installing, maintaining, monitoring, repairing and servicing security equipment in some states and territories. For further information, check with the relevant regulatory authority.
All cabling work, including telephone, data, fire and security alarm systems cabling, that connects with the telecommunications network must be performed by a registered cabler or under the direct supervision of a registered cabler as required by the Australian Communications Media Authority (ACMA) cabling provider rules. For further information on cabling registration requirements, check with ACMA.
Completion of some units of competency listed within this qualification may result in a vocational outcome that requires open cabling registration under the ACMA cabling provider rules registration system.  For further information on cabling registration requirements, check with ACMA.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Schedule
Packaging Rules
To achieve this qualification, competency must be demonstrated in:
Twelve (12) units of competency
- four (4) core units
- eight (8) elective units.

Electives must be chosen as follows:
- a minimum of three (3) units from Group A
- up to five (5) units from Groups A, B or C not already selected
- up to one (1) unit may be selected from any Training Package, as long as it contributes to a valid, industry-supported vocational outcome and maintains the AQF level of this qualification.

Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
1. Core Units

These units must be completed.

State Code National Code Title Hours Type
OAP80 CPPSEC2101 Apply effective communication skills to maintain security 8 Unit of competency
AWC80 ICTWHS204 Follow work health and safety and environmental policy and procedures 35 Unit of competency
ODX74 CPCWHS1001 Prepare to work safely in the construction industry 6 Unit of competency
OAP73 CPPSEC2105 Provide quality services to a range of security clients 8 Unit of competency
2. Elective Units: Group A - Technical Field of Work

At least three (3) units must be completed from this group.

State Code National Code Title Hours Type
OBJ05 CPPSEC2022 Install electronic locks and locking systems 10 Unit of competency
OBJ06 CPPSEC2021 Install security equipment and systems 20 Unit of competency
OBJ04 CPPSEC2023 Install video surveillance systems and equipment 20 Unit of competency
OBJ01 CPPSEC2026 Perform routine maintenance on security equipment and systems 30 Unit of competency
OBJ02 CPPSEC2025 Sell security products and services 8 Unit of competency
AWG35 ICTTEN202 Use hand and power tools 40 Unit of competency
3. Elective Units: Group B - Cabling Field of Work

Up to four (4) units can be completed from this group.

State Code National Code Title Hours Type
OBA71 ICTCBL247 Install, maintain and modify customer premises communications cabling: ACMA Open Rule 60 Unit of competency
OBA72 ICTCBL246 Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule 55 Unit of competency
AWG37 ICTCBL301 Install, terminate and certify structured cabling installation 30 Unit of competency
OBA46 ICTTEN208 Use electrical skills when working with telecommunications networks 35 Unit of competency
4. Elective Units: Group C - General

Up to five (5) units can be completed from this group.

State Code National Code Title Hours Type
AWD58 ICTTEN207 Install and test internet protocol devices in convergence networks 45 Unit of competency
OBJ03 CPPSEC2024 Monitor and respond to electronic information from security equipment and systems 6 Unit of competency
OBI86 CPPSEC3047 Provide estimate and quote on security system installations 20 Unit of competency
OBI96 CPPSEC3037 Test installed security equipment and systems 20 Unit of competency
OBA46 ICTTEN208 Use electrical skills when working with telecommunications networks 35 Unit of competency
Replaces
State Code National Code Title Type
BEX2 CPP20319 Certificate II in Technical Security Qualification
No information
Entry Requirements
No information
Traineeships and Apprenticeships
No information