Unit of competency Outline

Date retreived
23/07/2026 2:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair vehicle thermoplastic body panels and components

Repair vehicle thermoplastic body panels and components

Unit of competency
National Code
AURVTN017
State Code
AWZ81
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair vehicle interior and exterior thermoplastic panels and components. It involves preparing for the task, selecting and using specialist thermoplastic repair tools and materials, repairing thermoplastic components to pre-paint condition, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair thermoplastic body panels and components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Original equipment manufacturer (OEM) or authorised agency’s specifications for thermoplastic panel and component repairs and relevant safety data sheets (SDS) are sourced and interpreted
  • 1.3 Repair method is selected, and materials are checked for quality and prepared
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability
  • 1.6 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Carry out repair activities
  • 2.1 Suitable thermoplastic welding, fusion techniques and adhesives, including adhesion promoter where applicable, are used to repair thermoplastic body panels and components according to safety and environmental requirements
  • 2.2 Body filler that is formulated for the repaired thermoplastic is selected and used
  • 2.3 Repairs are completed to pre-paint condition according to specifications of OEM or authorised agency and workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and thermoplastic body panels are presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF503 AURVTN3017 Repair body panels and thermoplastic components Unit of competency