Unit of competency Outline

Date retreived
23/07/2026 6:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for complex rotary die cutting or embossing

Set up machine for complex rotary die cutting or embossing

Unit of competency
National Code
ICPCBF327
State Code
AUN17
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
50
Description
This unit describes the skills and knowledge required to set up a machine for complex rotary die cutting or embossing.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Job specifications are read and interpreted from job documentation or production control system
  • 1.2 Set-up is planned and carried out correctly in minimum time with minimum wastage
  • 1.3 Availability of all job related components is checked
2. Mount rotary cutting or embossing devices
  • 2.1 Cutting devices or dies are correctly mounted to die
  • 2.2 Cutting devices or dies are registered and proofed on die cylinder
  • 2.3 Appropriate cutting devices or dies are selected and secured to machine according to job specifications
3. Set up delivery systems
  • 3.1 Delivery systems are set up and adjusted according to job specifications
  • 3.2 Substrate is removed according to job specifications
4. Set up machine for basic rotary cutting
  • 4.1 Rotary cutting devices are set up and adjusted according to job specifications
  • 4.2 Cutting pressures are set up and adjusted according to job specifications
  • 4.3 Counter knives/anvils are set in correct position
5. Set up in-line units
  • 5.1 Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications
  • 5.2 Assistance is given in set-up of major in-line printing/converting/binding units
6. Conduct sample run
  • 6.1 Material to be used for sample is organised correctly
  • 6.2 Machine is set up and operated to produce a specified sample according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
  • 6.3 Sample is visually inspected and/or tested, or laboratory testing is organised, according to enterprise procedures
  • 6.4 Results are interpreted to determine adjustment requirements
  • 6.5 Adjustments are carried out according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
D3055 ICPCF327C Set up machine for complex rotary die cutting or embossing Unit of competency
Replaced By
State Code National Code Title Type
OBP53 ICPCBF3270 Set up machine for complex rotary die cutting or embossing Unit of competency