Unit of competency Outline

Date retreived
23/07/2026 1:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for complex rotary die cutting or embossing

Set up machine for complex rotary die cutting or embossing

Unit of competency
National Code
ICPCBF3270
State Code
OBP53
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
50
Description
This unit describes the skills and knowledge required to set up a machine for complex rotary die cutting or embossing.It applies to individuals who prepare material, monitor and run equipment and machinery and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Identify job specifications
  • 1.2 Set up required printing machinery according to manufacturer specifications and work health and safety (WHS) requirements
  • 1.3 Confirm availability of all job components
  • 1.4 Select and secure cutting devices and dies to machine
  • 1.5 Set up and adjust delivery systems
  • 1.6 Remove substrate from the process according to job specifications
2. Set up machine for basic rotary cutting
  • 2.1 Set up and adjust rotary cutting devices
  • 2.2 Establish and adjust cutting pressures
  • 2.3 Set counter knives and anvils in required position
3. Set up in-line units
  • 3.1 Prepare minor in-line units for basic processes and adjust according to machine requirements
  • 3.2 Provide assistance in set-up of major in-line units
4. Conduct sample run
  • 4.1 Operate machine according to manufacturer specifications and enterprise procedures to produce specified sample
  • 4.2 Inspect and test proof as required according to enterprise procedures
  • 4.3 Monitor and adjust registration of knives and confirm product quality meets the approved sample standard
No information
No information
Replaces
State Code National Code Title Type
AUN17 ICPCBF327 Set up machine for complex rotary die cutting or embossing Unit of competency