Unit of competency Outline

Date retreived
23/07/2026 1:20 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software

Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software

Unit of competency
National Code
UEECD0030
State Code
OBX62
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
020115 - Computer Graphics
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to prepare electrotechnology/utilities drawings using manual drafting and computer-aided design (CAD) equipment and software.It includes preparing, planning and completing electrotechnology/utilities drawings using manual drafting and CAD equipment and software. It also includes preparation and modification of preliminary electrotechnology/utilities drawings and diagrams using manual drafting methods, techniques, procedures, devices and CAD equipment and software from specifications, layouts, sketches or verbal instructions.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan electrotechnology/utilities drawing using manual drafting and CAD equipment and software
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures are identified and applied
  • 1.2 Hazards are identified, risks are assessed and control measures are implemented
  • 1.3 Extent of work is determined from job specifications and discussions with relevant person/s
  • 1.4 Relevant person/s is consulted to coordinate work
  • 1.5 CAD software, tools and equipment required for work are obtained in accordance with workplace procedures
2 Prepare electrotechnology/utilities drawing using manual drafting and CAD equipment and software
  • 2.1 WHS/OHS risk control measures and procedures for carrying out work are followed
  • 2.2 Design, detailed drawings and layouts required are determined from job specifications
  • 2.3 Technical data of system components is interpreted to determine parameters included in detailed drawings
  • 2.4 Relevant CAD software tools are used to produce detailed drawings based on industry standard protocols
  • 2.5 Detailed drawings are checked for accuracy and compliance with job specifications
  • 2.6 Unplanned situations are responded to in accordance with workplace procedures and approval with authorised person/s
3 Complete electrotechnology/utilities drawing using manual drafting and CAD equipment and software
  • 3.1 Completed drawings are submitted to relevant person/s and checked for accuracy and compliance with job specifications
  • 3.2 Modifications are followed and drawings re-submitted for final approval
  • 3.3 Completed drawings are filed in accordance with workplace procedures
No information
No information