Unit of competency Outline

Date retreived
23/07/2026 5:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install underground cable

Install underground cable

Unit of competency
National Code
ICTCBL308
State Code
AWE74
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to install underground cable for all communications applications in access networks or client premises.It applies to technical staff who install cable for new and upgrades of telecommunications cabling infrastructure for communications applications including broadcasting or reception (digital video broadcasting - terrestrial [DVB-T], digital video broadcasting - satellite [DVB-S], long term evolution [LTE]), closed-circuit television (CCTV), digital and analog, telephony, data, video, digital broadcasting, computer networks, local area networks (LAN), wide area networks (WAN), fibre optic networks and multimedia.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the Implementation Guide Companion Volume or the relevant regulator for specific guidance on requirements.
Notes
Elements and Performance Criteria
1 Prepare for underground cable hauling
  • 1.1 Prepare for given work according to relevant legislation, codes, regulations and standards
  • 1.2 Arrange access to site according to required procedure
  • 1.3 Verify cable installation requirements from plan and recognise constraints
  • 1.4 Inform appropriate personnel of existing and potential hazards on worksite
  • 1.5 Obtain information on location of other services from relevant authorities
  • 1.6 Select suitable tools and equipment and protective equipment to meet required industry standards
  • 1.7 Erect barriers according to safety requirements
  • 1.8 Set up cable installation equipment according to manufacturer’s requirements and enterprise guidelines
  • 1.9 Clean debris and obstructions from conduit using suitable safe methods
  • 1.10 Seal cable ends to exclude ingress of foreign matter
2 Haul underground cable
  • 2.1 Run hauling feeder through conduit to enable cable hauling following work health and safety (WHS) and environmental requirements
  • 2.2 Attach cable to hauling feeder according to manufacturer’s specifications
  • 2.3 Employ cable slippers or rollers to ensure no sheath damage when hauling into and out of enclosures
  • 2.4 Lubricate cable and haul evenly at correct tension to reduce risk of cable damage
  • 2.5 Maintain sufficient cable length allowance for jointing
3 Seal and secure cable and complete all documentation
  • 3.1 Tag all cables to enable future identification
  • 3.2 Seal cable ends to prevent ingress of foreign material
  • 3.3 Place cable on supports in enclosures to reduce damage to conductors and enable ease of access for maintenance
  • 3.4 Fit over voltage protection devices to all cables with metallic component where required
  • 3.5 Complete reports on installation and design amendments accurately and file promptly according to client requirements
  • 3.6 Reinstate site to identified requirements if required
  • 3.7 Notify client and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
D3325 ICTCBL3019A Install underground cable Unit of competency
Replaced By
State Code National Code Title Type
OBA59 ICTCBL329 Install underground cable for communications applications Unit of competency