Unit of competency Outline

Date retreived
24/07/2026 12:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare screen

Prepare screen

Unit of competency
National Code
ICPSCP215
State Code
AUO05
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to safely select and prepare screens for printing using appropriate equipment and procedures.It applies to individuals working under direct supervision and performing mainly routine tasks.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Select frame
  • 1.1 Frame is selected according to job specifications
  • 1.2 Quality, type and finish of frame are specified
2 Prepare frame
  • 2.1 Frame surface is appropriately prepared free of imperfections to receive mesh
  • 2.2 Tools and equipment used in frame preparation are suitable to achieve standard indicated in job specifications
3 Select mesh
  • 3.1 Required mesh type is selected according to job specifications
  • 3.2 Imperfections and flaws are identified and appropriate remedial action is taken
  • 3.3 Mesh is measured and cut from bulk supply to meet screen specifications with minimum wastage
4 Stretch and fix mesh
  • 4.1 Mesh is positioned in tensioning equipment at correct angle according to job specifications
  • 4.2 Tension is set and applied according to job specifications
  • 4.3 Tension is checked according to manufacturer or supplier specifications
  • 4.4 Mesh is pre-stretched prior to fixing and mesh is fixed to frame according to frame construction requirements
  • 4.5 Chemicals are mixed for application according to manufacturer specifications
  • 4.6 Screen is removed from apparatus after appropriate curing
5 Convert mesh
  • 5.1 Chemicals are selected for conversion of mesh according to manufacturer or supplier specifications
  • 5.2 Chemicals are applied to effect conversion according to manufacturer or supplier specifications and to work health and safety (WHS) requirements
6 Store screen
  • 6.1 Screens are identified and labelled
  • 6.2 Screens are stored in safe, clean and dry environment in subdued light
No information
No information
Replaces
State Code National Code Title Type
D3215 ICPSP215C Prepare screen Unit of competency
Replaced By
State Code National Code Title Type
OBQ48 ICPSCP2150 Prepare screen Unit of competency