Unit of competency Outline
Date retreived
23/07/2026 9:28 AM AWST
23/07/2026 9:28 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Identify performance and handling requirements of millinery materials
Identify performance and handling requirements of millinery materials
Unit of competency
National Code
LMTML3004A
LMTML3004A
State Code
W7421
W7421
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/10/2014
Field of Education
030107 - Garment Making
Original Release Date
15/10/2014
Nominal Hours
30
Description
This unit covers skills and knowledge required for the identification of performance and handling requirements of traditional and non-traditional millinery materials.
Notes
Elements and Performance Criteria
1 Identify the structure and composition of traditional and non-traditional millinery materials
- 1.1 The structure of a range of traditional millinery materials is identified
- 1.2 The composition of a range of traditional millinery materials is identified
- 1.3 The structure of a range of non-traditional millinery materials is identified
- 1.4 The composition of a range of non-traditional millinery materials is identified
2 Identify performance characteristics of millinery materials
- 2.1 Key performance characteristics of traditional and non-traditional millinery materials are identified and described
- 2.2 Performance testing of traditional and non-traditional millinery materials is conducted
- 2.3 Common problems and faults of materials are identified
- 2.4 Material quality is identified using established quality indicators
- 2.5 Performance of fabric is tested according to OHS practices
- 2.6 Performance characteristics are used to describe appropriate uses of millinery materials
3 Identify handling requirements of millinery materials
- 3.1 Material finishes and implications for handling are identified
- 3.2 Care and cleaning requirements are identified
- 3.3 Compatibility of materials is identified for combined applications
- 3.4 Implications for millinery construction are identified
- 3.5 Labelling requirements are identified according to Australian Standards
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Traditional and non-traditional millinery materials may include
woven and non-woven materials
natural and synthetic materials
flat or moulded materials
composite materials
foundation materials
linings
covering fabrics
trims
components - wire, ribbon, feathers
Performance characteristics may include
abrasion
wearability
absorbency
durability
elasticity
heat sensitivity
colour fastness
strength
Performance testing may include
Performance tests for this unit are those where for traditional millinery materials the test procedure has already been determined and the acceptable range of outcomes is established. Tests may include:
light
heat
steam
application of adhesives
application of size (stiffener)
strength
drape ability
resilience
Quality indicators may include
finish
composition
structure
weight
density or evenness of density
even print or dye colour
resilience
suitability or workability for application
grain
texture
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Finishes may include
colouration
brushing
sizing
decorative surface finishes for aesthetics
floating threads or fibres
Compatibility of materials and implications for millinery construction may include
identifying if the composition of the millinery materials causes limitations to usage or application
identifying if the structure of the millinery materials causes limitations to usage or application
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Traditional and non-traditional millinery materials may include
woven and non-woven materials
natural and synthetic materials
flat or moulded materials
composite materials
foundation materials
linings
covering fabrics
trims
components - wire, ribbon, feathers
Performance characteristics may include
abrasion
wearability
absorbency
durability
elasticity
heat sensitivity
colour fastness
strength
Performance testing may include
Performance tests for this unit are those where for traditional millinery materials the test procedure has already been determined and the acceptable range of outcomes is established. Tests may include:
light
heat
steam
application of adhesives
application of size (stiffener)
strength
drape ability
resilience
Quality indicators may include
finish
composition
structure
weight
density or evenness of density
even print or dye colour
resilience
suitability or workability for application
grain
texture
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Finishes may include
colouration
brushing
sizing
decorative surface finishes for aesthetics
floating threads or fibres
Compatibility of materials and implications for millinery construction may include
identifying if the composition of the millinery materials causes limitations to usage or application
identifying if the structure of the millinery materials causes limitations to usage or application
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
identify the structure of traditional and non-traditional millinery materials
identify the composition of traditional and non-traditional millinery materials
conduct performance testing of millinery materials
identify performance characteristics of traditional and non-traditional millinery materials
test and identify handling characteristics of traditional and non-traditional millinery materials
identify quality indicators of millinery materials
identify implications for millinery construction or production
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
identify the structure of traditional and non-traditional millinery materials
identify the composition of traditional and non-traditional millinery materials
conduct performance testing of millinery materials
identify performance characteristics of traditional and non-traditional millinery materials
test and identify handling characteristics of traditional and non-traditional millinery materials
identify quality indicators of millinery materials
identify implications for millinery construction or production
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAV07 | MSTML3004 | Identify performance and handling requirements of millinery materials | Unit of competency |
