Unit of competency Outline

Date retreived
22/07/2026 11:40 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify performance and handling requirements of millinery materials

Identify performance and handling requirements of millinery materials

Unit of competency
National Code
MSTML3004
State Code
BAV07
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030107 - Garment Making
Original Release Date
01/12/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to identify performance and handling requirements of traditional and non-traditional millinery materials.The unit of competency applies to materials used in the production of millinery and the skills and knowledge required to guide the selection of millinery material suitable to various millinery applications.Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to assess performance and handling requirements
  • 2.1 Identify the structure and composition of traditional and non-traditional millinery materials
  • 2.2 Identify and describe key performance characteristics of traditional and non-traditional millinery materials.
  • 2.3 Identify labelling requirements according to Australian Standards
3 Identify performance characteristics of millinery materials
  • 3.1 Conduct performance testing of traditional and non-traditional millinery materials
  • 3.2 Identify common problems and faults of materials
  • 3.3 Identify material quality using established quality indicators and test fabric performance
  • 3.4 Use performance characteristics to describe appropriate uses of millinery materials
4 Identify handling requirements of millinery materials
  • 4.1 Identify material finishes and implications for handling
  • 4.2 Identify care and cleaning requirements
  • 4.3 Identify compatibility of materials or combined applications
  • 4.4 Identify implications for millinery construction
No information
No information
Replaces
State Code National Code Title Type
W7421 LMTML3004A Identify performance and handling requirements of millinery materials Unit of competency
State Code National Code Title Type
BDG5 MST30316 Certificate III in Millinery Qualification
BDF8 MST40416 Certificate IV in Millinery Qualification