Unit of competency Outline

Date retreived
23/07/2026 4:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a grinding process

Operate a grinding process

Unit of competency
National Code
FBPOPR2038
State Code
BBF98
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
23/01/2018
View on TGA
State Implementation and Classification
Approved Date
27/07/2018
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/07/2018
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to set up, operate, adjust and shut down a grinding process.This unit applies to individuals who work under general supervision and exercise limited autonomy in a food processing environment. It typically applies to the production worker responsible for applying basic operating principles to the operation and monitoring of a grinding process and associated equipment.All work must be carried out to comply with workplace procedures, in accordance with State/Territory work health and safety, and food safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work in grinding processing area
  • 1.1 Read or listen to work instructions from supervisor and clarify where needed
  • 1.2 Confirm materials are available to meet operating requirements
  • 1.3 Identify and confirm cleaning and maintenance requirements and status according to work health and safety and food safety requirements
  • 1.4 Wear appropriate personal protective clothing and ensure correct fit
2. Prepare the grinding equipment and process for operation
  • 2.1 Fit and adjust machine components and related attachments to meet operating requirements
  • 2.2 Enter processing and operating parameters as required to meet safety and production requirements
  • 2.3 Check equipment performance and adjust according to production requirements
  • 2.4 Carry out pre-start checks according to work health and safety and operating procedures
3. Operate and monitor the grinding process
  • 3.1 Start, operate and monitor the grinding process for variation in operating conditions
  • 3.2 Monitor the process to confirm that specifications are met
  • 3.3 Identify, rectify and report out-of-specification equipment, product or process outcomes according to workplace requirements
  • 3.4 Follow and apply workplace housekeeping and environmental procedures
4. Shut down the grinding process
  • 4.1 Identify the appropriate shutdown procedure
  • 4.2 Shut down the process according to work health and safety and operating procedures
  • 4.3 Identify and report maintenance requirements according to workplace procedures
  • 4.4 Maintain workplace records according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
D4626 FDFOP2038A Operate a grinding process Unit of competency
Replaced By
State Code National Code Title Type
ODM38 FBPOPR2085 Operate a grinding process Unit of competency