Unit of competency Outline
Date retreived
24/07/2026 6:33 AM AWST
24/07/2026 6:33 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Coordinate on-site installation of furnishing products
Coordinate on-site installation of furnishing products
Unit of competency
National Code
LMFFT4001B
LMFFT4001B
State Code
W8638
W8638
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/02/2010
Field of Education
040319 - Furnishing Installation
Original Release Date
19/02/2010
Nominal Hours
40
Description
This unit covers the competency to coordinate tradespersons who provide services involved in the installation, refurbishment, restoration or repair of furnishing products, primarily in a kitchen, bathroom or laundry setting.
Notes
Elements and Performance Criteria
1. Plan the coordination of trade services involved in the project
- 1.1. Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity
- 1.2. Load bearing walls are located
- 1.3. Work site is inspected for compliance with contract documentation, including confirmation that all work can be undertaken as a non-structural improvement
- 1.4. Additional information or revised drawings are sourced where necessary
- 1.5. Tradespersons are identified for the required installing services
- 1.6. Timeframes for carrying out the work are developed
2. Coordinate and inspect trade service outcomes
- 2.1. Appropriate trade services are coordinated in accordance with relevant timeframes
- 2.2. The impact of any variations are assessed and timeframes are varied as necessary
- 2.3. Trade works are progressively checked to ensure compliance with contract documentation
- 2.4. Satisfactory performance of trade services carried out by trade provider is monitored
- 2.5. The rectification of identified faults is organised and coordinated
- 2.6. The restoration of the site is coordinated to ensure compliance with contractual and industry standards
3. Verify trade work compliance with contract requirements
- 3.1. Final trade work is inspected, assessed and accepted or rejected
- 3.2. Payments for accepted trade services are authorised
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous substances and dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Furnishing products may include:
cabinets and the full range of products required in the installation
refurbishment
restoration or repair of furnishing
particularly in kitchens
bathrooms or laundries
Coordinated tradespersons
Those who, by regulation and competency, have the authority to work on:
water supply
fixtures and fittings
drainage
natural and artificial lighting
power sources
ceiling and wall linings
waterproofing and sealants
ceramic tiling
interior painting
floor/finish coverings
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Contractual documents and explanatory notes
Building codes, Australian Standards and CSIRO Notes on the Science of Building
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous substances and dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Furnishing products may include:
cabinets and the full range of products required in the installation
refurbishment
restoration or repair of furnishing
particularly in kitchens
bathrooms or laundries
Coordinated tradespersons
Those who, by regulation and competency, have the authority to work on:
water supply
fixtures and fittings
drainage
natural and artificial lighting
power sources
ceiling and wall linings
waterproofing and sealants
ceramic tiling
interior painting
floor/finish coverings
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Contractual documents and explanatory notes
Building codes, Australian Standards and CSIRO Notes on the Science of Building
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret contracts and work orders and locate and apply relevant information.
Apply safety coordination requirements for equipment, products and materials, including ventilation requirements and the use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Coordinate a site involving at least three tradespeople on three separate occasions
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource Implications
Access to work instructions, plans, work orders, associated and supporting tradespeople, industry and other standards, communications equipment and work areas.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret contracts and work orders and locate and apply relevant information.
Apply safety coordination requirements for equipment, products and materials, including ventilation requirements and the use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Coordinate a site involving at least three tradespeople on three separate occasions
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource Implications
Access to work instructions, plans, work orders, associated and supporting tradespeople, industry and other standards, communications equipment and work areas.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI450 | MSFFT4001 | Coordinate on-site installation of furnishing products | Unit of competency |
