Unit of competency Outline

Date retreived
24/07/2026 4:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Coordinate on-site installation of furnishing products

Coordinate on-site installation of furnishing products

Unit of competency
National Code
MSFFT4001
State Code
WI450
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
040303 - Building Construction Management
Original Release Date
20/06/2014
Nominal Hours
40
Description
This unit of competency covers coordinating tradespersons who provide services involved in the installation, refurbishment, restoration or repair of furnishing products, primarily in a kitchen, bathroom or laundry setting.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking kitchen and bathroom work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Plan the coordination of trade services involved in the project
  • 1.1 Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity
  • 1.2 Load bearing walls are located
  • 1.3 Worksite is inspected for compliance with contract documentation, including confirmation that all work can be undertaken as a non-structural improvement
  • 1.4 Additional information or revised drawings are sourced where necessary
  • 1.5 Tradespersons are identified for the required installing services
  • 1.6 Timeframes for carrying out the work are developed
2 Coordinate and inspect trade service outcomes
  • 2.1 Appropriate trade services are coordinated in accordance with relevant timeframes
  • 2.2 The impact of any variations are assessed and timeframes are varied as necessary
  • 2.3 Trade works are progressively checked to ensure compliance with contract documentation
  • 2.4 Satisfactory performance of trade services carried out by trade provider is monitored
  • 2.5 The rectification of identified faults is organised and coordinated
  • 2.6 The restoration of the site is coordinated to ensure compliance with contractual and industry standards
3 Verify trade work compliance with contract requirements
  • 3.1 Final trade work is inspected, assessed and accepted or rejected
  • 3.2 Payments for accepted trade services are authorised
No information
No information
Replaces
State Code National Code Title Type
W8638 LMFFT4001B Coordinate on-site installation of furnishing products Unit of competency
Replaced By
State Code National Code Title Type
OEM41 MSFFT4013 Coordinate onsite installation of cabinetry Unit of competency