Unit of competency Outline

Date retreived
23/07/2026 5:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain and repair barrels

Maintain and repair barrels

Unit of competency
National Code
MSFCP3003
State Code
OEK07
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
20
Description
This unit describes the skills and knowledge required to inspect, disassemble, clean, repair and restore barrels. Workers with this competency follow established procedures using discretion, judgement and problem solving.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify and confirm maintenance requirements
  • 1.1 Verify and comply with work health and safety (WHS) legislative and organisational requirements
  • 1.2 Review work order, and confirm and clarify with appropriate personnel
  • 1.3 Disassemble barrel as necessary to allow inspection
  • 1.4 Clean barrel of any materials which may inhibit inspection
  • 1.5 Test, inspect and evaluate barrel for faults
  • 1.6 Identify and confirm further maintenance and repair requirements for barrel
2. Prepare for maintenance and repair
  • 2.1 Analyse maintenance and repair requirements, and determine procedures for checking quality at each stage of the process
  • 2.2 Select tools, equipment, materials and components required for maintenance and repair, and prepare them for use
  • 2.3 Complete disassembly required for maintenance and repair
  • 2.4 Clean barrel and components internally and externally
3. Complete maintenance and repair activities
  • 3.1 Replace faulty parts and components
  • 3.2 Repair leakage faults using appropriate techniques and materials
  • 3.3 Re-assemble and refire barrel
  • 3.4 Test and inspect barrel to confirm the effectiveness of repairs
  • 3.5 Select and apply cleaning and sterilisation processes
4. Clean work area and maintain equipment
  • 4.1 Tag and report faulty and defective equipment in accordance with workplace procedures
  • 4.2 Remove waste and scrap following workplace procedures
  • 4.3 Clean tools and equipment, check they are in serviceable condition, and store them appropriately in accordance with workplace procedures
  • 4.4 Clean equipment and work area in accordance with workplace procedures
  • 4.5 Complete records and reports to workplace requirements
No information
No information
Replaces
State Code National Code Title Type
WI275 MSFCP2004 Maintain and repair barrels Unit of competency
State Code National Code Title Type
BIK0 MSF30322 Certificate III in Cabinet Making and Timber Technology Qualification