Unit of competency Outline

Date retreived
22/07/2026 11:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain and repair barrels

Maintain and repair barrels

Unit of competency
National Code
MSFCP2004
State Code
WI275
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
20
Description
This unit of competency covers preparing, inspecting, disassembling, cleaning, repairing and restoring barrels. It may apply to a factory or an on-site environmentNo licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify and confirm maintenance requirements
  • 1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to coopering operations are verified and complied with
  • 1.2 Work order is reviewed, confirmed and clarified with appropriate personnel
  • 1.3 Barrel is disassembled, as necessary, to provide inspection access
  • 1.4 Barrel is cleaned of build-up materials or other matter which may inhibit inspection
  • 1.5 Barrel is tested, inspected and evaluated for faults
  • 1.6 Further maintenance and repair requirements are identified and/or confirmed
2 Prepare for maintenance and repair
  • 2.1 Maintenance and repair requirements are analysed and procedures are determined for checking quality at each stage of the process
  • 2.2 Tools, equipment, materials and components required for the maintenance and repair are selected, sourced and prepared for use
  • 2.3 Disassembly required for maintenance and repair is completed
  • 2.4 Barrel and components are cleaned internally and externally
3 Complete maintenance and repair activities
  • 3.1 Faulty parts and components are replaced
  • 3.2 Leakage faults are repaired by the appropriate means
  • 3.3 Barrel is re-assembled and refired
  • 3.4 Barrel is tested and inspected to confirm the effectiveness of repairs
  • 3.5 Cleaning and sterilisation processes relevant to the work circumstances are selected and applied
  • 3.6 Barrel is finished, fully restored and prepared for use
4 Clean work area and maintain equipment
  • 4.1 Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures
  • 4.2 Waste and scrap are removed following workplace procedures
  • 4.3 Tools and equipment used are cleaned, inspected for serviceable condition and stored appropriately in accordance with workplace procedures
  • 4.4 Equipment and work area clean-up is maintained in accordance with workplace procedures
  • 4.5 Records and reports are completed to workplace requirements
No information
No information
Replaced By
State Code National Code Title Type
OEK07 MSFCP3003 Maintain and repair barrels Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification