Unit of competency Outline

Date retreived
22/07/2026 1:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble and connect telecommunication frames and cabinets

Assemble and connect telecommunication frames and cabinets

Unit of competency
National Code
UEEDV0001
State Code
OBX51
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to assemble and connect telecommunication frames and cabinets.It includes identifying, assembling, connecting and checking quality of assembled telecommunication frames and cabinets.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify telecommunication frame and cabinet
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures are identified and applied
  • 1.2 Hazards are identified, risks are assessed and control measures are implemented
  • 1.3 Work instructions and relevant diagrams are identified and applied
  • 1.4 Advice is sought from workplace supervisor to ensure work is coordinated with relevant person/s
  • 1.5 Materials required for work are obtained in accordance with workplace procedures
  • 1.6 Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Assemble and connect telecommunication frame and cabinet
  • 2.1 WHS/OHS risk control workplace measures are followed
  • 2.2 Equipment is checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Frame/cabinet and communication components are fitted in accordance with work instructions, industry standards, manufacturer instructions and workplace procedures
  • 2.4 Interconnections are made in accordance with workplace procedures
  • 2.5 Installation and equipment are checked for compliance with relevant industry standards
  • 2.6 Completed communication frames/cabinets are checked/tested against manufacturer instructions, industry standards and workplace procedures
  • 2.7 Unplanned situations are responded to in accordance with workplace procedures and approval of authorised person/s
  • 2.8 Work is performed using sustainable energy principles and practices without wasting materials, damaging apparatus, surrounding environments or services in accordance with workplace procedures
3 Check quality of assembled telecommunication frame and cabinet
  • 3.1 WHS/OHS risk control measures for work completion are followed
  • 3.2 Quality of assembled frame/cabinet is checked/tested against work instructions, industry standards, manufacturer instructions and workplace procedures
  • 3.3 Appropriate solutions are used where corrective actions to assembled components are required in accordance with workplace procedures
  • 3.4 Work report forms are completed and appropriate person/s notified in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC471 UEENEEF115A Assemble and connect telecommunication frames and cabinets Unit of competency