Unit of competency Outline

Date retreived
23/07/2026 11:33 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform basic packaging tests and inspections

Perform basic packaging tests and inspections

Unit of competency
National Code
FBPBPG2008
State Code
OAN29
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
18/04/2019
Field of Education
019909 - Laboratory Technology
Original Release Date
18/04/2019
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to carry out the tests and inspections required to monitor product and process at various control points on an operating packaging line.The unit applies to individuals who work under general supervision in bottling and packaging and are responsible for applying basic quality assurance principles to product.All work must be carried out to comply with workplace procedures, according to state/territory health and safety, and food safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify requirements for packaging testing
  • 1.1 Confirm work instructions and identify potential health and safety in the workplace hazards and controls with supervisor
  • 1.2 Select, fit and use appropriate personal protective equipment
  • 1.3 Identify key packaging equipment and recognise its function and operating principles
2. Prepare for testing
  • 2.1 Receive and register samples and prepare for testing
  • 2.2 Ensure that services are available and ready for use
  • 2.3 Select, prepare and check test equipment and materials are available and ready for use according to testing procedures
  • 2.4 Identify and report defects in samples, materials and test equipment
3. Perform on-line packaging tests
  • 3.1 Carry out test method as directed
  • 3.2 Use equipment and materials as directed
  • 3.3 Read and interpret results according to testing procedures
  • 3.4 Identify out-of-standard results and take appropriate action according to workplace procedures
  • 3.5 Liaise with operators in other work areas to ensure ongoing packaging process runs efficiently and effectively
4. Complete on-line packaging tests
  • 4.1 Dispose of waste generated according to workplace procedures
  • 4.2 Clean, store and maintain test equipment according to test equipment instructions
  • 4.3 Carry out work in accordance with workplace environmental guidelines
  • 4.4 Record workplace information according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
S7953 FDFLAB2003A Perform basic packaging tests and inspections Unit of competency