Unit of competency Outline

Date retreived
23/07/2026 11:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Configure and troubleshoot advanced network switching

Configure and troubleshoot advanced network switching

Unit of competency
National Code
ICTTEN422
State Code
AWD29
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
80
Description
This unit describes the skills and knowledge required to perform network switch configuration and troubleshooting. This unit applies to large networks involving wireless local area networks (WLANs), virtual local area networks (VLANs), interVLAN routing, remote access management and operating system management of network devices.It applies to individuals who work cooperatively with others, interpret technical information accurately, and work proficiently with information communication technology (ICT). Installers of internet protocol (IP), enterprise network technicians, network administrators and network support personnel complete this type of work.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to work on switched network
  • 1.1 Prepare for given work according to work health and safety (WHS) and environmental requirements with appropriate personnel
  • 1.2 Identify safety hazards and implement risk control measures in consultation with appropriate personnel
  • 1.3 Determine nature and scope of network and network topology from job briefs or appropriate personnel
  • 1.4 Select and obtain wireless and wired network components requirements according to enterprise procedures
  • 1.5 Obtain operating instructions, manuals, hardware and software testing methodologies
  • 1.6 Consult appropriate personnel to ensure task is coordinated effectively with others involved at the worksite
2. Configure network switches
  • 2.1 Set up and configure network switches according to manufacturer’s specifications and enterprise procedures
  • 2.2 Build and configure a routed network using remote access management
  • 2.3 Establish multiple VLANs across the network to manage access and traffic across the network
3. Troubleshoot network
  • 3.1 Monitor network traffic and assess performance against manufacturer’s specifications and established procedures
  • 3.2 Troubleshoot network according to manufacturer’s specifications and enterprise procedures
  • 3.3 Identify and rectify faults according to enterprise procedures
4. Complete and document network installation and configuration
  • 4.1 Restore worksite to safe condition according to established safety procedures
  • 4.2 Record and store essential configuration information according to enterprise procedures
  • 4.3 Notify appropriate personnel of completion of the task according to enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3472 ICTTEN4213A Configure and troubleshoot advanced network switching Unit of competency