Unit of competency Outline

Date retreived
23/07/2026 9:38 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test finger jointed timber

Test finger jointed timber

Unit of competency
National Code
FWPTMM4213
State Code
OFC78
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2023
View on TGA
State Implementation and Classification
Approved Date
19/05/2023
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2023
Nominal Hours
25
Description
This unit of competency describes the skills and knowledge required to collect, prepare and test samples of finger jointed timber. The unit includes interpreting test results for the identification of problems in production and making necessary changes to processes.The unit applies to individuals who are engaged in finger jointed timber production.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for testing finger jointed timber
  • 1.1 Determine job requirements from work order or instruction and, where required, seek clarification from appropriate personnel
  • 1.2 Confirm workplace health and safety and environmental protection practices and/or procedures for task, including use of personal protective equipment
  • 1.3 Confirm legislation, standards and codes of practice relevant to testing finger jointed timber
  • 1.4 Identify and assess hazards and take actions to mitigate risks related to testing operations
  • 1.5 Consult appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.6 Select tools and equipment for testing operations, and check for serviceability according to workplace procedures
  • 1.7 Collect, label and prepare samples for testing according to workplace procedures
2. Calibrate equipment for testing finger jointed timber
  • 2.1 Set up equipment for testing strength of finger jointed timber
  • 2.2 Calibrate test equipment according to manufacturer instructions and workplace procedures
  • 2.3 Record calibration results according to workplace procedures
3. Conduct test on finger jointed timber and analyse test results
  • 3.1 Test sample according to workplace procedures
  • 3.2 Collate information on test results
  • 3.3 Analyse and record test results
  • 3.4 Store samples according to workplace procedures
4. Finalise test on finger jointed timber
  • 4.1 Communicate test results according to workplace procedures
  • 4.2 Report sub-standard product test results, assist with identification of production problems and recommend corrective actions
  • 4.3 Modify test sampling process in response to identified testing problems and production changes
  • 4.4 Record and report testing outcomes
No information
No information
Replaces
State Code National Code Title Type
AXL54 FWPCOT3208 Test strength of joints Unit of competency