Unit of competency Outline
Date retreived
23/07/2026 5:21 PM AWST
23/07/2026 5:21 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate a forklift
Operate a forklift
Unit of competency
National Code
TLID0016
TLID0016
State Code
ODP96
ODP96
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
14/03/2022
Field of Education
030717 - Plant And Machine Operations
Original Release Date
14/03/2022
Nominal Hours
35
Description
This unit involves the skills and knowledge required to operate a forklift.It includes checking forklift condition, driving forklift to fulfil operational requirements, and monitoring and maintaining forklift performance and site conditions in compliance with the relevant state/territory authority licence requirements and regulations, in a variety of operational contexts.Operation of a forklift is performed under supervision, generally within a team environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Check forklift condition
- 1.1 Forklift pre-start is documented and completed prior to commencement of work and relevant to equipment
- 1.2 Forklift is checked for compliance in accordance with relevant legislation, manufacturer specifications and workplace procedures
- 1.3 Correct personal protective equipment (PPE) is selected and worn relevant to workplace procedures
- 1.4 Equipment attachments are selected, checked against data plate, secured correctly and appropriate to the task and terrain
- 1.5 Equipment faults and non-compliances are reported to relevant personnel
2 Drive forklift
- 2.1 Route is planned in accordance with traffic management plans for the worksite
- 2.2 Forklift is accessed correctly, using three points of contact, seatbelt is correctly worn and fastened, and mirrors and seats are adjusted for safe operation by driver
- 2.3 Forklift is started, steered, manoeuvred, positioned and stopped in accordance with regulations, manufacturer instructions and workplace procedures
- 2.4 Engine power is managed to ensure efficiency and performance and to minimise engine and gear damage
- 2.5 Operational hazards are identified and/or anticipated and avoided or controlled through defensive driving and appropriate hazard control techniques
- 2.6 Forklift is driven in reverse, maintaining visibility and achieving accurate positioning
3 Operate forklift to handle loads
- 3.1 Lifting task to be undertaken is appropriately planned, and correct lifting truck and allowed attachments selected
- 3.2 Load is lifted, carried, lowered and set down in accordance with WHS/OHS legislation, manufacturer specifications and workplace procedures
4 Monitor site conditions
- 4.1 Hazards and traffic flow are identified when selecting the most efficient route and appropriate adjustments are made
- 4.2 Site conditions are continuously monitored to enable safe operations and to ensure no injury to people or damage to property, equipment, loads or facilities occurs
5 Monitor and maintain forklift performance
- 5.1 Performance and efficiency of vehicle operation is monitored during use
- 5.2 Defective/irregular performance and malfunctions are reported to relevant personnel
- 5.3 Forklift records are maintained/updated in accordance with workplace procedures and legislative requirements
6 Perform shutdown
- 6.1 Forklift is parked, shut down, checklist completed and equipment secured in accordance with manufacturer specifications, regulations and workplace procedures
- 6.2 Defective/irregular performance, malfunctions or maintenance are recorded and reported to relevant personnel
- 6.3 PPE is stored correctly in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVJ74 | TLID2010 | Operate a forklift | Unit of competency |