Unit of competency Outline

Date retreived
23/07/2026 1:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install sprung timber flooring

Install sprung timber flooring

Unit of competency
National Code
MSFFL3084
State Code
OAJ44
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
46
Description
This unit describes the skills and knowledge required to set out, cut and lay timber for the installation of a special purpose sprung platform-based timber floor for use in sporting or leisure facilities.This unit applies to flooring technicians installing sprung timber flooring in accordance with pre-determined work orders.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Correctly identify work requirements and process from review of documentation
  • 1.3 Confirm subfloor suitability for installation consistent with Australian Standards and manufacturer recommendations
  • 1.4 Select underlays, adhesives, trims and accessories based on job requirements
  • 1.5 Select and check tools, equipment and materials prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  • 1.6 Plan sequence of work to identify the starting point and to ensure efficiency and quality of the work
2. Set out materials
  • 2.1 Inspect timber flooring material and confirm species, grade, size and quantity against work orders
  • 2.2 Moisture check timber using required equipment and confirm suitability of moisture content for site conditions as per pre-site inspection procedures
  • 2.3 Remove or undercut skirting boards or cover trims, and store for re-fitting or send for machining in accordance with work requirements
  • 2.4 Organise and use timber flooring for fixing in accordance with safety management requirements
  • 2.5 Prepare required adhesives and edge strips for use
  • 2.6 Measure area to be covered and establish working lines and starting point
3. Cut timber flooring
  • 3.1 Follow instructions and sequence for laying and fixing
  • 3.2 Lay underfloor pads in accordance with manufacturer recommendations
  • 3.3 Install batten and/or sheet substrate materials in accordance with specifications and manufacturer recommendations
  • 3.4 Lay out timber flooring to meet directional sequence, pattern match, specification requirements, and to minimise waste and joins
  • 3.5 Maximise the aesthetics of the materials, including matching grains and colours
  • 3.6 Accurately and clearly mark timber for cutting
  • 3.7 Cut timber flooring to length and size for final laying to provide appropriate size and shape ensuring minimum waste
  • 3.8 Use materials in accordance with safety management requirements
4. Lay sprung timber flooring
  • 4.1 Follow instructions and sequence for laying and fixing
  • 4.2 Use fixing methods and equipment in accordance with manufacturer recommendations and safety management requirements
  • 4.3 Allow for appropriate field and perimeter expansion joints
  • 4.4 Fit and/or re-fit skirting boards or cover trims and finish to quality requirements
  • 4.5 Inspect finished job and rectify imperfections following workplace procedures
5. Complete housekeeping
  • 5.1 Store and recycle unused materials in accordance with workplace procedures
  • 5.2 Check, clean and store tools and equipment in accordance with workplace procedures
  • 5.3 Clean work area and dispose of rubbish safely
  • 5.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI394 MSFFL3037 Install sprung timber flooring Unit of competency
State Code National Code Title Type
BED0 MSF30818 Certificate III in Flooring Technology Qualification