Unit of competency Outline

Date retreived
22/07/2026 11:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Grind combs and cutters for machine shearing

Grind combs and cutters for machine shearing

Unit of competency
National Code
AHCSHG205
State Code
BAM07
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
030717 - Plant And Machine Operations
Original Release Date
12/01/2017
Nominal Hours
15
Description
This unit of competency describes the skills and knowledge required to grind combs and cutters for machine shearing so that they are effective for the type of wool and shearing conditions.All work must be carried out to comply with workplace procedures, work health and safety, biosecurity requirements and sustainability practices.This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine need for sharpening combs and cutters
  • 1.1 Check combs and cutters for wear and report any issues found
  • 1.2 Clean combs and cutters prior to grinding
  • 1.3 Identify work health and safety hazards and report to supervisor
2. Prepare grinder and pendulum for use
  • 2.1 Check the grinder and its location for serviceability and safety report safety hazards to supervisor
  • 2.2 Identify grinder faults or malfunctions and report to supervisor for repair or replacement
  • 2.3 Apply grinding papers to grinder discs
  • 2.4 Store and care for grinding papers
  • 2.5 Check, clean and adjust the bottom bar of the pendulum to ensure it is true
  • 2.6 Confirm that the pressure bar and pins are set at the recommended distance
  • 2.7 Check the height setting of pendulum
3. Carry out grinding
  • 3.1 Wear eye protection while grinding is carried out
  • 3.2 Secure comb or cutter for grinding
  • 3.3 Apply correct pressure while grinding
  • 3.4 Grind combs and cutters as directed
  • 3.5 Check combs and cutters visually for even grinding
  • 3.6 Identify and rectify faults or unevenness in grinding
  • 3.7 Ensure grinding wheel is not left running when unattended
No information
No information
Replaces
State Code National Code Title Type
D7215 AHCSHG205A Grind combs and cutters for machine shearing Unit of competency
Replaced By
State Code National Code Title Type
OFE92 AHCSHG215 Grind combs and cutters for machine shearing Unit of competency
State Code National Code Title Type
BCZ7 AHC20116 Certificate II in Agriculture Qualification
BCY3 AHC21316 Certificate II in Shearing Qualification
AE401 Shearing Skill Set Skill set