Unit of competency Outline

Date retreived
23/07/2026 3:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install pressurised irrigation systems

Install pressurised irrigation systems

Unit of competency
National Code
AHCIRG331
State Code
BAN82
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
21/12/2017
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
059999 - Agriculture, Environmental And Related Studies, N.e.c.
Original Release Date
12/01/2017
Nominal Hours
65
Description
This unit of competency covers the skills and knowledge required to install low and sprinkler volume irrigation systems.It applies to individuals who take responsibility for own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Organise resources for installation work
  • 1.1 Select and use materials, tools, equipment and machinery
  • 1.2 Check that parts and equipment match system drawings and specifications
  • 1.3 Carry out pre-operational and safety checks on tools, equipment and machinery
  • 1.4 Identify work health and safety hazards, assess risks and implement suitable controls
  • 1.5 Select, use and maintain suitable safety and personal protective equipment
  • 1.6 Identify environmental considerations of irrigation installation activities
  • 1.7 Check water supply to ensure that it is compatible with system specifications
2. Set out and prepare site
  • 2.1 Measure and mark out irrigation lines
  • 2.2 Confirm trenches are at the specified depth without damage to services, facilities, features and established plants
  • 2.3 Observe regulations relevant to the situation
  • 2.4 Use work practices that reflect sustainable horticulture principles and respond to local community requirements
3. Install irrigation components
  • 3.1 Interpret the irrigation system plan and, where applicable, supervise contractors and monitor work to ensure it conforms to the plan
  • 3.2 Assemble and connect components and complete and test joints
  • 3.3 Fit and adjust fittings and valves and secure all joints
  • 3.4 Maintain a clean and safe work area while installation work is carried out
4. Commission irrigation system
  • 4.1 Calibrate testing and monitoring equipment
  • 4.2 Confirm the start-up sequence is in accordance with the operations manual
  • 4.3 Flush system as required
  • 4.4 Identify operating faults and take corrective where required
  • 4.5 Record work outcomes and report to supervisor
5. Complete installation work
  • 5.1 Finish off earthworks
  • 5.2 Confirm the system configuration and capacity matches the installation plan
  • 5.3 Restore site and clear materials and equipment from the site on completion of maintenance works
  • 5.4 Clean and store tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OBJ86 AHCIRG345 Install pressurised irrigation systems Unit of competency