Unit of competency Outline
Date retreived
23/07/2026 9:42 PM AWST
23/07/2026 9:42 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install pressurised irrigation systems
Install pressurised irrigation systems
Unit of competency
National Code
AHCIRG345
AHCIRG345
State Code
OBJ86
OBJ86
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
28/01/2020
Field of Education
059999 - Agriculture, Environmental And Related Studies, N.e.c.
Original Release Date
28/01/2020
Nominal Hours
65
Description
This unit of competency describes the skills and knowledge required to organise resources, set out and prepare an irrigation installation site and install, commission and complete pressurised irrigation system installation.The unit applies to individuals who install pressurised irrigation systems under broad direction and take responsibility for their own work.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Organise resources for installation work
- 1.1 Confirm activity to be undertaken, including identifying potential hazards and risks and implementing safe working practices to manage risks
- 1.2 Select required materials, tools, equipment and machinery and check for safe operation
- 1.3 Check that parts and equipment match system drawings and specifications
- 1.4 Select, fit, use and maintain safety and personal protective equipment applicable to the task
- 1.5 Carry out pre-operational checks on tools, equipment and machinery
- 1.6 Identify environmental considerations of irrigation installation activities
- 1.7 Check water supply to ensure that it is compatible with system specifications
2. Set out and prepare site
- 2.1 Measure and mark out irrigation lines
- 2.2 Confirm trenches are at the specified depth without damage to services, facilities, features and established plants
- 2.3 Observe regulations relevant to the situation
- 2.4 Use work practices that reflect sustainable horticulture principles and environmental requirements
3. Install irrigation components
- 3.1 Interpret the irrigation system plan and, where applicable, supervise contractors and monitor work to ensure it conforms to the plan
- 3.2 Assemble and connect components and complete and test joints
- 3.3 Fit and adjust fittings and valves and secure all joints
- 3.4 Maintain a clean and safe work area while installation work is carried out
4. Commission irrigation system
- 4.1 Calibrate testing and monitoring equipment
- 4.2 Confirm start-up sequence according to operations manual
- 4.3 Flush system as required
- 4.4 Identify operating faults and take corrective where required
- 4.5 Record work outcomes and report to supervisor
5. Complete installation work
- 5.1 Finish off earthworks to specifications
- 5.2 Confirm system configuration and capacity matches installation plan
- 5.3 Restore site and clear materials and equipment from the site on completion of maintenance works
- 5.4 Clean and store tools and equipment according workplace requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAN82 | AHCIRG331 | Install pressurised irrigation systems | Unit of competency |