Unit of competency Outline
Date retreived
22/07/2026 9:26 PM AWST
22/07/2026 9:26 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install curtains
Install curtains
Unit of competency
National Code
MSFBAA318
MSFBAA318
State Code
OFK06
OFK06
TGA Status
Current
Current
DTWD Status
Pending
Pending
State Implementation and Classification
Approved Date
Field of Education
040319 - Furnishing Installation
Original Release Date
Nominal Hours
Description
This unit of competency describes the skills and knowledge required to identify work requirements and then install curtains according to specifications. The unit involves planning job requirements, identifying required products, fittings and attachments to be used, and applying workplace procedures to ensure their safe and correct installation.The unit applies to individuals installing curtains in a range of openings, including windows and sliding doors, working under limited supervision. Curtain tracks may be installed on a range of surfaces, including concrete, masonry and timber.Where installed control devices involve hardwiring to be connected to mains power, electrical work must be completed by a qualified licensed electrician.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.
Notes
Elements and Performance Criteria
1. Prepare for installation of curtain
- 1.1 Identify job and curtain and track requirements from work order and supplier instructions
- 1.2 Consult with customer to confirm access and installation requirements, including type of curtain and track to be installed and location of installation
- 1.3 Assess installation site, existing services and substrate material to confirm it is safe and suitable for installation
- 1.4 Identify and apply workplace health and safety and personal protection requirements of installation
- 1.5 Plan logical, safe and efficient work sequence that reflects work order and quality requirements
2. Fit and fasten curtain
- 2.1 Identify and select required materials, tools, equipment and accessories based on work order, and check their safe and effective operation
- 2.2 Set up required materials, equipment, curtain and tracking system in line with work instructions and manufacturer specifications
- 2.3 Fit brackets using required hardware and adjust to suit curtain operation according to workplace procedures
- 2.4 Fit track or rod, hang and dress curtain and set operating mechanism according to work order, design requirements and manufacturer specifications
- 2.5 Test installed curtain for correct operation within limits of normal operation, and adjust and repair performance problems in line with own level of responsibility
- 2.6 Ensure all child safety requirements have been met for domestic corded internal window coverings, where applicable
3. Finalise installation
- 3.1 Check that completed work complies with quality and work order requirements, and rectify identified deficiencies within scope of own role
- 3.2 Clean work area and surfaces, and dispose of waste safely and sustainably according to workplace procedures
- 3.3 Identify and store surplus unused items for re-use and/or recycling according to workplace procedures
- 3.4 Check, clean and store tools and equipment, and tag and report faulty items according to workplace procedures
- 3.5 Advise customer on correct operation and maintenance of curtain
- 3.6 Legibly complete and process required workplace and customer documentation according to workplace procedures
No information
No information
No information
| State Code | National Code | Title | Type |
|---|---|---|---|
| BTV2 | MSF30926 | Certificate III in Shading and Security Screens | Qualification |