This unit of competency describes the skills and knowledge required to install awnings according to job requirements. The unit involves planning job requirements, identifying required products to be used and their measurements and fasteners, and applying workplace procedures to ensure safe and correct installation.The unit applies to individuals working under limited supervision to install awnings. The styles of awning to be installed include folding-arm and guided. The awnings may be installed in a range of openings, including windows, fixed and sliding doors, and building entrances. They may be installed on a range of surfaces, including metal, concrete, masonry and timber.Where installed control devices involve hardwiring to be connected to mains power, electrical work must be completed by a qualified licensed electrician.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.Licensing, legislative or certification requirements may apply to this unit. Relevant state/territory and local government agencies should be consulted to determine necessary requirements for installing awnings. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).