Unit of competency Outline

Date retreived
22/07/2026 1:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply and monitor systems for stable mining

Apply and monitor systems for stable mining

Unit of competency
National Code
RIIMEX404D
State Code
WH386
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
29/05/2014
Nominal Hours
80
Description
This unit describes a participant’s skills and knowledge required to apply and monitor systems for stable mining in Metalliferous mining.This unit is appropriate for those working in supervisory roles.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for the application of systems for stable mining
  • 1.1 Access, interpret and apply systems for stable mining operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Obtain and interpret emergency procedures, and be prepared for an emergency
  • 1.6 Communicate and coordinate activities with others prior to, during and on completion of the work activity
  • 1.7 Identify, obtain and allocate resources required for the application of the design system
  • 1.8 Identify training needs of team members and prepare training plans
2. Apply the design system
  • 2.1 Communicate, apply and monitor approved design system
  • 2.2 Communicate and apply primary, secondary and other support systems
  • 2.3 Identify and assess mining constraints impacting on the maintenance of a stable mining structure in accordance with the design system
  • 2.4 Install, monitor and assess ground support systems
  • 2.5 Identify and assess system failures
  • 2.6 Apply and monitor mining sequences in accordance with the design system
  • 2.7 Identify and assess virgin and induced stress control methods
  • 2.8 Continually monitor hazards and risks , and ensure safety of self, other personnel, plant and equipment
  • 2.9 Contribute to systems audit and review requirements
3. Apply design system monitoring and maintenance procedures
  • 3.1 Schedule and carry out inspection, repair and maintenance activities
  • 3.2 Record, report and review maintenance and monitoring requirements and activities
  • 3.3 Submit reasoned recommendations to improve the safety, efficiency and effectiveness of systems for stable mining
No information
No information
Replaces
State Code National Code Title Type
D9339 RIIMEX404B Apply and monitor systems for stable mining Unit of competency
Replaced By
State Code National Code Title Type
OBW59 RIIMEX404E Apply and monitor systems for stable mining Unit of competency