Qualification Outline
22/07/2026 2:27 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate IV in Surface Extraction Operations
Certificate IV in Surface Extraction Operations
RII40115
AZD4
Replaced
Transition (Replaced)
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 5.00 | 25/01/2021 | Current | Approved |
| 4.00 | 23/09/2020 | Replaced | Approved |
| 3.00 | 31/01/2020 | Replaced | Approved |
| 2.00 | 11/12/2018 | Replaced | Approved |
| 1.00 | 14/12/2015 | Replaced | Approved |
Description
This qualification reflects the role of employees such as a supervisor or team leader working in an open cut mine or quarry. They perform tasks involving a broad range of varied activities most of which are complex and non-routine. They are responsible for the quantity and quality of the output of others, contribute to the development of technical solutions to non-routine problems and apply safety management plans to the workplace.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
Schedule
Packaging Rules
Total number of units = thirteen (13)- four (4) core units plus
- nine (9) elective units, of which:
- one (1) must be chosen from Group A
- at least two (2) must be chosen from Group B
- no more than four (4) may be chosen from Group C
- no more than one (1) may be chosen from Group D
- no more than two (2) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
1. Core Units
All four (4) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WH647 | RIIRIS401D | Apply site risk management system | 40 | Unit of competency |
| WH292 | RIIGOV401D | Apply, monitor and report on compliance systems | 80 | Unit of competency |
| OBO93 | RIICOM301E | Communicate information | 20 | Unit of competency |
| AUI33 | BSBSUS301 | Implement and monitor environmentally sustainable work practices | 40 | Unit of competency |
2. Group A Elective Units
One (1) unit must be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WH758 | RIIWHS402D | Examine and maintain mine safety | 50 | Unit of competency |
| AUL17 | BSBWHS401 | Implement and monitor WHS policies, procedures and programs to meet legislative requirements | 40 | Unit of competency |
3. Group B Elective Units
At least two (2) units must be completed.
Please refer to the packaging rules for the full details of available options.
4. Group C Elective Units
No more than four (4) units may be completed.
Please refer to the packaging rules for the full details of available options.
5. Group D Elective Units
No more than one (1) unit may be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WH269 | RIIERR205D | Apply initial response First Aid | 20 | Unit of competency |
| WG732 | HLTAID003 | Provide first aid | 20 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| J643 | RII40113 | Certificate IV in Surface Extraction Operations | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGQ0 | RII40120 | Certificate IV in Surface Extraction Operations | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships