Unit of competency Outline

Date retreived
22/07/2026 1:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate inboard and outboard motors

Operate inboard and outboard motors

Unit of competency
National Code
MARC005
State Code
WH812
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/10/2013
View on TGA
State Implementation and Classification
Approved Date
04/02/2014
Field of Education
031701 - Maritime Engineering
Original Release Date
04/02/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to operate inboard and outboard motors, and to diagnose basic faults.This unit applies to deck and engine workers working in the maritime industry on vessels up to 12 metres. They could be working independently or as part a vessel crew.This unit has links to legislative and certification requirements.
Notes
Elements and Performance Criteria
1 Operate inboard and outboard motors
  • 1.1 Pre-start checks are performed on the motor
  • 1.2 Fuel is checked to ensure there is adequate fuel, including a reserve, on board
  • 1.3 Motor is started and stopped safely and correctly
  • 1.4 Motor controls are used to manoeuvre the vessel safely to complete work tasks
  • 1.5 Motor is operated within safe limits during normal manoeuvres
2 Secure vessel on completion of work task
  • 2.1 Vessel is moored safely
  • 2.2 Fuel system is closed down
  • 2.3 Vessel is secured
  • 2.4 Fuel is stored to minimise environmental and fire hazards where appropriate
  • 2.5 Unserviceable equipment is reported and tagged out as unserviceable
3 Maintain inboard and outboard motors
  • 3.1 Fuel filters are drained of excess water
  • 3.2 Batteries and connections are maintained to ensure reliable electrical supply to the motor
  • 3.3 Engine and gearbox oil is checked and lubrication is applied
  • 3.4 Engine mounting gear is checked as necessary
4 Identify basic inboard and outboard motor faults
  • 4.1 Operating difficulties caused by fuel-related factors are identified
  • 4.2 Electrical faults are identified, tagged out and reported
  • 4.3 Motor propulsion faults are identified, tagged out and reported
No information
No information
Replaces
State Code National Code Title Type
S5480 TDMMR3007B OPERATE AND CARRY OUT BASIC SERVICE CHECKS ON SMALL VESSEL MARINE PROPULSION SYSTEMS Unit of competency
WG383 MARC2005A Operate inboard and outboard motors Unit of competency
Replaced By
State Code National Code Title Type
OAB70 MARC037 Operate inboard and outboard motors Unit of competency