Unit of competency Outline
Date retreived
22/07/2026 11:03 PM AWST
22/07/2026 11:03 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Drive heavy rigid vehicle
Drive heavy rigid vehicle
Unit of competency
National Code
TLIC3004
TLIC3004
State Code
AWM98
AWM98
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
04/08/2016
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
04/08/2016
Nominal Hours
40
Description
This unit involves the skills and knowledge required to drive a heavy rigid vehicle safely in compliance with relevant state/territory road and traffic authority licence requirements and regulations including road rules for heavy rigid vehicles.It includes maintaining systematic and efficient control of all vehicle functions, monitoring traffic and road conditions, managing vehicle condition and performance, and effectively managing hazardous situations.Driving is performed with limited or minimum supervision, and with duty of care responsibility for self and others in achieving the prescribed outcomes.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Drive heavy rigid vehicle
- 1.1 Heavy rigid vehicle is started, steered, manoeuvred, positioned and stopped in accordance with traffic regulations and manufacturer instructions
- 1.2 Engine power is managed to ensure efficiency and performance, and to minimise engine and gear damage
- 1.3 Engine operation is maintained within manufacturer specified torque range and temperature through effective gear selection and smooth transition in gear changes
- 1.4 Heavy rigid vehicle braking system is managed and operated to ensure effective vehicle control under all conditions
- 1.5 Driving hazards are identified and/or anticipated and avoided or controlled through defensive driving
- 1.6 Heavy rigid vehicle is driven in reverse, maintaining visibility and achieving accurate positioning
- 1.7 Heavy rigid vehicle is parked, shut down and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures
- 1.8 Over width and overweight permit applications are completed and submitted in accordance with relevant regulatory requirements, as required
- 1.9 Appropriate procedures are followed in a driving emergency
2 Monitor traffic and road conditions
- 2.1 Most efficient route of travel is taken by monitoring and anticipating traffic flows and conditions, road standards and other factors likely to cause delays or route deviations
- 2.2 Traffic and road conditions are constantly monitored and acted on to enable safe operation and to ensure no injury to people or damage to property, equipment loads and facilities
3 Monitor and maintain vehicle performance
- 3.1 Vehicle performance is maintained through pre-operational inspections and vehicle checks
- 3.2 Performance and efficiency of vehicle operation is monitored during use
- 3.3 Defective or irregular performance or malfunctions are reported to appropriate authority
- 3.4 Vehicle records are maintained/updated and information is processed in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D5026 | TLIC3004A | Drive heavy rigid vehicle | Unit of competency |