Unit of competency Outline
Date retreived
22/07/2026 4:04 PM AWST
22/07/2026 4:04 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use furniture making sector hand and power tools
Use furniture making sector hand and power tools
Unit of competency
National Code
LMFFM2001B
LMFFM2001B
State Code
W8599
W8599
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
09/12/2009
Field of Education
030717 - Plant And Machine Operations
Original Release Date
09/12/2009
Nominal Hours
38
Description
This unit covers the competency to use hand and power tools in applications relating to the furniture making sector of the furnishing industry
Notes
Elements and Performance Criteria
1. Identify hand and power tools
- 1.1. Types of hand and power tools and their functions identified
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.3. Sources of power supply recognised
2. Select hand tools
- 2.1. Hand tools selected are consistent with needs of the job
- 2.2. Selected hand tools are checked for serviceability and safety and any faults reported to supervisor
- 2.3. Equipment is selected to hold or support material for hand tools application where applicable
3. Use hand tools
- 3.1. Material is located and held in position for hand tool application
- 3.2. Hand tools are safely and effectively used according to their intended use
- 3.3. Hand tools are safely located when not in immediate use
4. Select power tools
- 4.1. Power tools are selected consistent with needs of the job in accordance with conventional work practice
- 4.2. Power tools are visually checked for serviceability and safety in accordance with OH&S requirements and any faults reported to supervisor
- 4.3. Equipment is selected to hold or support materials for power tool application as applicable
5. Use power tools
- 5.1. Material is located and held in position for power tool application as applicable
- 5.2. Power tools are safely and effectively used in application processes
- 5.3. Power tools are safely located when not in use
6. Clean up work area and tools
- 6.1. All tools are cleaned, maintained and stored
- 6.2. Equipment is cleaned, maintained and stored
- 6.3. Work area is cleared and waste removed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Hand tools for furniture making are to include, but not be limited to:
hand planes
chisels
hand saws
spokeshave
hammer
mallet
marking-out tools
files
rasps
scraper
screwdrivers and hand drill
Power tools for furniture making are to include, but not be limited to:
drop saw
circular power saw
planer
drill
jig saw
router
trimmer
biscuit machine
brad/nail and staple gun and sanders
Unit scope
Work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to perform work tasks which should include dressing materials, cutting joints, finishing surfaces, cutting straight and compound angles, jointing materials, edge trimming and the basic grinding of cutting tools
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Fault reporting
Reporting of faults in the operation of hand and power tools may be verbal or written
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Hand tools for furniture making are to include, but not be limited to:
hand planes
chisels
hand saws
spokeshave
hammer
mallet
marking-out tools
files
rasps
scraper
screwdrivers and hand drill
Power tools for furniture making are to include, but not be limited to:
drop saw
circular power saw
planer
drill
jig saw
router
trimmer
biscuit machine
brad/nail and staple gun and sanders
Unit scope
Work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to perform work tasks which should include dressing materials, cutting joints, finishing surfaces, cutting straight and compound angles, jointing materials, edge trimming and the basic grinding of cutting tools
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Fault reporting
Reporting of faults in the operation of hand and power tools may be verbal or written
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate and apply relevant information related to hand and power tools
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods, tools, equipment or products
maintain required production output and product quality
Adopt and carry out correct procedures prior to and during use of the range of hand and power tools stipulated in the range statement
Carry out operator maintenance on hand and power tools, including the grinding of:
chisels
hard plane blades or irons
drill bits
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Furniture making sector hand and power tools. Materials used in the manufacturing and/or installation of furnishing products.
Method of Assessment
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate and apply relevant information related to hand and power tools
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods, tools, equipment or products
maintain required production output and product quality
Adopt and carry out correct procedures prior to and during use of the range of hand and power tools stipulated in the range statement
Carry out operator maintenance on hand and power tools, including the grinding of:
chisels
hard plane blades or irons
drill bits
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Furniture making sector hand and power tools. Materials used in the manufacturing and/or installation of furnishing products.
Method of Assessment
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0272 | LMFFM2001A | Use furniture making sector hand and power tools | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI410 | MSFFM2001 | Use furniture making sector hand and power tools | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W651 | LMF32109 | Certificate III in Cabinet Making | Qualification |
| W031 | LMF30302 | Certificate III in Furniture Making | Qualification |
| W023 | LMF20302 | Certificate II in Furniture Making | Qualification |
| W649 | LMF20309 | Certificate II in Furniture Making | Qualification |
| W032 | LMF30402 | Certificate III in Furniture Making (Cabinet Making) | Qualification |
| W033 | LMF30502 | Certificate III in Furniture Making (Wood Machining) | Qualification |