Qualification Outline
Date retreived
22/07/2026 7:43 AM AWST
22/07/2026 7:43 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Furniture Making (Cabinet Making)
Certificate III in Furniture Making (Cabinet Making)
Qualification
National Code:
LMF30402
LMF30402
State Code:
W032
W032
TGA Status:
Replaced
Replaced
DTWD Status:
Replaced
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
11/05/2009
Approved Date
09/12/2003
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
800
Duration
Unspecified
Current Release Number
1.00
Current Release Date
11/05/2009
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 11/05/2009 | Current | Approved |
Description
Schedule
1.
CORE
These units are mandatory
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8496 | LMFCR0003B | Carry out measurements and calculations | 20 | Unit of competency |
| W8495 | LMFCR0002B | Communicate in the workplace | 20 | Unit of competency |
| W8494 | LMFCR0001B | Follow safe working policies and practices | 40 | Unit of competency |
| W8497 | LMFCR0004B | Work effectively with others | 15 | Unit of competency |
2.
SPECIALIST
These units are mandatory
3.
SPECIALIST ELECTIVE
Select one of these units
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8612 | LMFFM3003B | Produce angled and curved furniture using manufactured board | 64 | Unit of competency |
| W8613 | LMFFM3004B | Produce angled and curved furniture using solid timber | 64 | Unit of competency |
4.
SPECIALIST ELECTIVES
5.
GENERIC
These units are mandatory
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8696 | LMFGN3002B | Estimate and cost job | 16 | Unit of competency |
| W8695 | LMFGN3001B | Read and interpret work documents | 24 | Unit of competency |
6.
IMPORTED
This unit is mandatory
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S2466 | TDTD397C | Handle dangerous goods/hazardous substances | 20 | Unit of competency |
7.
ELECTIVES
Select six (6) units.
These can be specialist, generic or imported in accordance with the General Structuring Rules.
Note: A maximum of one (1) 2000 series unit can be selected.
An example of electives may be:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8601 | LMFFM2004B | Apply sheet laminates by hand | 8 | Unit of competency |
| W8633 | LMFFM3033B | Construct jigs and fixtures | 34 | Unit of competency |
| W8604 | LMFFM2007B | Follow plans to assemble production furniture | 16 | Unit of competency |
| W8620 | LMFFM3013B | Measure and draw site layout for manufactured furniture products | 16 | Unit of competency |
| W8616 | LMFFM3007B | Prepare and apply decorative surfaces for furniture | 20 | Unit of competency |
| W8617 | LMFFM3010B | Select timbers for furniture production | 10 | Unit of competency |
| W8628 | LMFFM3027B | Set up, operate and maintain automated edge banding machines | 58 | Unit of competency |
| W8631 | LMFFM3031B | Set up, operate and maintain CNC machining and processing centres | 56 | Unit of competency |
| W8622 | LMFFM3021B | Set up, operate and maintain drilling machines | 16 | Unit of competency |
| W8621 | LMFFM3020B | Set up, operate and maintain sawing machines | 20 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2316 | 12520WA | Certificate III in Furniture Making (Cabinetmaking) | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W651 | LMF32109 | Certificate III in Cabinet Making | Qualification |
VET Info Notes
This training program is a representation of the qualification code LMF30402 taken from the Furnishing Training Package LMF02 which should be consulted for full description of requirements. LMF30402 is endorsed until 31 October 2005.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the CSSN Swan TAFE on 10 November 2003.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the CSSN Swan TAFE on 10 November 2003.
Entry Requirements
No information
Traineeships and Apprenticeships
(AP01610) CABINET MAKER
Apprenticeship