Unit of competency Outline

Date retreived
23/07/2026 2:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, replace and test non-electrical vehicle components and accessories

Remove, replace and test non-electrical vehicle components and accessories

Unit of competency
National Code
AURVTV001
State Code
AWZ00
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove, replace, fit and test non-electrical vehicle components and accessories. It involves preparing for the task, selecting and using specialist tools and equipment, removing, installing and testing non-electrical components and accessories during vehicle servicing or vehicle repair, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove, replace and test non-electrical components and accessories
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications and workplace instructions are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability
  • 1.5 Work is planned to sequence activities, minimise waste, and use time efficiently
2. Remove and replace non-electrical components and accessories
  • 2.1 Work area is prepared and tools and equipment are set up according to workplace procedures and safety and environmental requirements
  • 2.2 Non-electrical components and accessories are identified and removed without causing damage to vehicle or components
  • 2.3 Non-electrical components and accessories are refitted according to manufacturer specifications and workplace instructions
3. Test non-electrical components and accessories
  • 3.1 Test information is accessed and interpreted from manufacturer specifications
  • 3.2 Testing of non-electrical components and accessories is completed according to manufacturer specifications and without causing damage to systems or components
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and components and accessories are presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF574 AURVTV2001 Remove, replace, fit and test components and accessories Unit of competency