Unit of competency Outline

Date retreived
24/07/2026 2:22 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use blinds, awnings, security screens and grilles hand and power tools

Use blinds, awnings, security screens and grilles hand and power tools

Unit of competency
National Code
MSFBA2012
State Code
OEL94
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/04/2023
Nominal Hours
40
Description
This unit describes the skills and knowledge required to select and use hand and power tools to manufacture and install blinds, awnings, security screens and grilles. Workers with this competency use tools to complete routine tasks.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for tool use
  • 1.1 Identify task requirement from work instructions
  • 1.2 Select the appropriate tool based on task requirements and identify work health and safety requirements for its use
  • 1.3 Confirm serviceability and safety of tool and report any faults to supervisor
  • 1.4 Select equipment to hold or support material based on the tool selected and the nature of the task
  • 1.5 Prepare material and hold in position to ensure safe operation
2. Use tools
  • 2.1 Use tools safely and in accordance with workplace procedures and manufacturer specifications
  • 2.2 Use techniques that optimise the effective use of the tool for the nominated task
  • 2.3 Ensure safe state, position and location of tools in the work area when not in immediate use
  • 2.4 Follow safety procedures for the use of power and the handling of power tools
3. Clean up work area and tools
  • 3.1 Clean tools and equipment using cleaning materials and agents suited to the item
  • 3.2 Complete routine operator maintenance on tools in accordance with workplace procedures and manufacturer instructions
  • 3.3 Store tools and equipment based on specific storage needs and workplace requirements
No information
No information
Replaces
State Code National Code Title Type
WI252 MSFBA2001 Use blinds, awnings, security screens and grilles hand and power tools Unit of competency
Replaced By
State Code National Code Title Type
OFK00 MSFBAA201 Use shading and security sector hand and power tools Unit of competency
State Code National Code Title Type
BIJ6 MSF20122 Certificate II in Furnishing Qualification