Unit of competency Outline

Date retreived
23/07/2026 9:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use shading and security sector hand and power tools

Use shading and security sector hand and power tools

Unit of competency
National Code
MSFBAA201
State Code
OFK00
TGA Status
Current
DTWD Status
Pending
Current Release Number
1.00
Current Release Date
13/03/2026
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030717 - Plant And Machine Operations
Original Release Date
Nominal Hours
Description
This unit of competency describes the skills and knowledge required to select and use hand and power tools to manufacture and/or install shading and security screens, which may include curtains, blinds, awnings, shade sails, louvre shutters, roller shutters and security and non-security screens.The unit applies to individuals who use tools to complete routine tasks under limited supervision.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.
Notes
Elements and Performance Criteria
1. Prepare for tool use
  • 1.1 Identify task requirement from work instructions
  • 1.2 Select the appropriate tool based on task requirements, and identify work health and safety requirements for its use
  • 1.3 Confirm serviceability and safety of tool, and report any faults to supervisor
  • 1.4 Select equipment to hold or support material based on the tool selected and the nature of the task
  • 1.5 Prepare material and secure in position to ensure safe operation
2. Use tools
  • 2.1 Use tools and required power supply safely and in accordance with workplace procedures and manufacturer specifications
  • 2.2 Use techniques that optimise the effective use of the tool for the nominated task
  • 2.3 Ensure safe state, position and location of tools in the work area when not in immediate use
3. Clean up work area and tools
  • 3.1 Clean tools and equipment following manufacturer guidelines
  • 3.2 Complete routine operator maintenance on tools in accordance with workplace procedures and manufacturer instructions
  • 3.3 Store tools and equipment based on specific storage needs and workplace requirements
No information
No information
Replaces
State Code National Code Title Type
OEL94 MSFBA2012 Use blinds, awnings, security screens and grilles hand and power tools Unit of competency
State Code National Code Title Type
BTV2 MSF30926 Certificate III in Shading and Security Screens Qualification