Unit of competency Outline

Date retreived
22/07/2026 11:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Slice product using simple machinery

Slice product using simple machinery

Unit of competency
National Code
AMPS207
State Code
BAY14
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/08/2016
View on TGA
State Implementation and Classification
Approved Date
13/12/2016
Field of Education
110105 - Butchery
Original Release Date
13/12/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to set up, load, clean and operate manually set and adjusted slicing equipment in a smallgoods manufacturing establishment.A skilled operator in a smallgoods establishment would slice meat to customer specifications. This unit is not applicable for operators of large-scale production slicing machinery.All work should be carried out to comply with workplace and hygiene requirements.This unit applies to individuals who work under general supervision, exercise limited autonomy and have some accountability for their own work.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.This unit must be delivered and assessed in the context of Australian meat industry standards and regulations.
Notes
Elements and Performance Criteria
1. Prepare slicing equipment
  • 1.1 Set up equipment and accessories in accordance with product specifications and workplace health and safety requirements
  • 1.2 Clean equipment and machinery in accordance with hygiene and workplace requirements
  • 1.3 Conduct pre-start safety checks in accordance with workplace and regulatory requirements and corrective action for identified faults
2. Prepare product for slicing
  • 2.1 Prepare product for slicing to workplace requirements
  • 2.2 Handle out-of-specification product to workplace requirements
3. Operate slicing equipment
  • 3.1 Adjust equipment to suit product specifications in accordance with workplace and health and safety requirements
  • 3.2 Operate equipment to slice a range of products to specifications at a speed similar to production requirements and in accordance with manufacturer's specifications
  • 3.3 Change equipment from the slicing of one product to the slicing of another to workplace requirements
  • 3.4 Identify, record and report equipment malfunctions or faults in accordance with workplace requirements
4. Weigh and bag products within weight specifications
  • 4.1 Weigh and bag products with weight specifications to specifications, workplace, hygiene and sanitation, Quality Assurance (QA) and customer requirements
  • 4.2 Adjust weight control mechanisms to specifications and workplace requirements
5. Clean and maintain slicing equipment
  • 5.1 Clean and maintain slicing equipment according to workplace and manufacturer's specifications
  • 5.2 Implement cleaning procedures to workplace requirements when changing product to be sliced
No information
No information
Replaces
State Code National Code Title Type
D9092 MTMS213B Slice product using simple machinery Unit of competency
Replaced By
State Code National Code Title Type
ODP01 AMPSMA201 Slice product using simple machinery Unit of competency