Unit of competency Outline

Date retreived
23/07/2026 12:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test engines using a dynamometer

Test engines using a dynamometer

Unit of competency
National Code
AURMTE001
State Code
AXB92
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
32
Description
This unit describes the performance outcomes required to test engines using a dynamometer. The engines being tested may be in a vehicle or stand alone. It involves preparing for the task, selecting the correct test procedure, carrying out testing, analysing test results, and completing workplace processes and documentation. It involves setting up and conducting dynamometer tests on engines, and logging, analysing and reporting the test data in order to maximise engine performance.It applies to those working in the motor sport industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for dynamometer operation
  • 1.1 Job requirements are determined from test information
  • 1.2 Dynamometer is checked for calibration and serviceability according to manufacturer and workplace procedures
  • 1.3 Tools, equipment and materials are selected and checked for serviceability
  • 1.4 Hazards associated with the work are identified and risks are managed according to safety and environmental requirements
  • 1.5 Engine or vehicle is checked prior to testing according to manufacturer and workplace procedures
  • 1.6 Engine or vehicle connections to dynamometer are checked and secured according to manufacturer, workplace and safety procedures
2. Conduct dynamometer testing
  • 2.1 Appropriate load and run sequence and test parameters are determined, including run-in period for new engines
  • 2.2 Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and data is documented
  • 2.3 Correction factors are calculated and applied to data
3. Analyse test results
  • 3.1 Dynamometer test data is analysed and conclusions are drawn about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures
  • 3.2 Findings are reported based on dynamometer data, including recommendations for engine configuration and/or modifications to improve performance, according to workplace procedures
  • 3.3 Recommended engine modifications are tested on dynamometer according to manufacturer and workplace procedures and safety requirements, and data is documented
  • 3.4 Data is presented to team members according to workplace procedures
4. Complete work processes
  • 4.1 Dynamometer shutdown procedure is carried out according to manufacturer and workplace procedures and safety requirements
  • 4.2 Engine is disconnected from dynamometer according to manufacturer and workplace procedures
  • 4.3 Dynamometer and associated equipment are checked and maintained according to workplace procedures
  • 4.4 Tools and equipment are checked and stored according to workplace procedures
  • 4.5 Workplace documentation, including dynamometer test results, are processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF286 AURMTE4001 Test engines using a dynamometer Unit of competency
Replaced By
State Code National Code Title Type
OCJ73 AURMTE101 Test engines using a dynamometer Unit of competency