Assemble roller shutters

Unit of competency Outline

Date retreived
23/07/2026 4:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFBAA307

State Code
OFK04

TGA Status
Current

DTWD Status
Pending

Current Release Number
1.00

Current Release Date
13/03/2026

View on TGA

State Implementation and Classification

Approved Date

Field of Education

030199 - Manufacturing Engineering And Technology, N.e.c.

Original Release Date

Nominal Hours

Description

This unit of competency describes the skills and knowledge required to identify and assemble roller shutters according to job requirements. The unit involves planning job requirements, identifying required shutter products to be assembled and their measurements, and applying workplace procedures to ensure safe and correct assembly. The unit does not involve installing the roller shutters.The unit applies to individuals who work under limited supervision to assemble light-weight domestic, heavy-weight commercial, and fire-rated or cyclone-rated roller shutters. The shutters may be required for a range of openings, including windows, fixed and sliding doors, building entrances, and inside and exterior to buildings.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.

Notes

Elements and Performance Criteria

1. Prepare to assemble roller shutters

1.1 Identify and confirm job requirements and style of roller shutter to be assembled from work order and supplier instructions
1.2 Identify workplace health and safety and personal protection requirements of assembly according to workplace procedures
1.3 Select and calibrate tools and equipment, and check their safe and effective operation according to workplace procedures
1.4 Select and source materials and shutter mechanisms from stock, and check type, colour and quality against job requirements and technical specifications
1.5 Plan logical, safe and efficient work sequence that reflects work order and quality requirements, and economically uses materials

2. Assemble and join roller shutter components

2.1 Inspect, measure and mark materials for shutter, and check for quality in line with work instructions and manufacturer specifications
2.2 Cut required materials for shutter to correct size in line with manufacturer specifications and tolerances
2.3 Machine shutter components according to job requirements and manufacturer specifications
2.4 Assemble component parts in the correct order according to job requirements and manufacturer specifications
2.5 Finish shutter assembly and test operation of curtain, including control limits, according to work instructions and technical specifications

3. Finalise assembly

3.1 Check that assembled shutter complies with quality and work order requirements, and rectify identified deficiencies within scope of own role, or report to designated personnel
3.2 Clean and store assembled shutter according to workplace procedures
3.3 Check, clean and store tools and equipment, and tag and report faulty items according to workplace procedures
3.4 Identify and store surplus unused materials for re-use and/or recycling according to workplace procedures
3.5 Clean work area and surfaces, and dispose of waste safely and sustainably according to workplace procedures
3.6 Legibly complete and process required workplace documentation according to workplace requirements

No information

Replaces

State Code	National Code	Title	Type
OBP12	MSFBA3019	Assemble roller shutters	Unit of competency

State Code	National Code	Title	Type
BTV2	MSF30926	Certificate III in Shading and Security Screens	Qualification