Unit of competency Outline
Date retreived
23/07/2026 11:39 AM AWST
23/07/2026 11:39 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fit attachments and assemble components for customised polymer products
Fit attachments and assemble components for customised polymer products
Unit of competency
National Code
PMBFIN202E
PMBFIN202E
State Code
ODB57
ODB57
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
26
Description
This unit describes the skills and knowledge required to use polymer fabrication techniques to fit and assemble components or customised products.This unit applies to an individual working alone or as part of a team. This unit principally refers to those specialised polymer fabrication techniques that can be applied to the manufacture of orthotics, prosthetics, bionic and mechanical healthcare and industrial products. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Establish and prepare requirements for fitting and assembly processes
- 1.1 Identify requirements from job order specifications defined by compliance requirements
- 1.2 Assemble required equipment and materials for electrical, traditional machine sewing, riveting, or 3D-printing finishing techniques
- 1.3 Consult safety data sheets and standard operating procedures to confirm safe work processes
- 1.4 Prepare and assemble required jigs and clamps to support finishing tasks
- 1.5 Prepare vacuum-assist equipment to support finishing tasks
- 1.6 Prepare robotic workmate assistance to support finishing tasks
2. Fit and assemble job with attachments
- 2.1 Apply polymer or metallic fasteners according to job specifications
- 2.2 Apply thermoset bonding resins according to job specifications
- 2.3 Complete other secondary process operations as required to meet job specifications
- 2.4 Apply waste management and recycling strategies according to workplace procedures
- 2.5 Monitor process and compare with specifications to identify suitability for further processing or for customer delivery
- 2.6 Assemble and sort finished products to meet delivery requirements
3. Inspect product for quality conformance
- 3.1 Inspect finished product for suitability for further processing, for customer delivery or for remediation, according to job specifications and workplace procedures
- 3.2 Perform sample testing of coupons and bonded pieces to establish operational and visual conformance, and compliance with relevant standards
- 3.3 Accurately maintain compliance records relating to relevant standards
- 3.4 Pack as required by job specifications
4. Respond to product imperfections
- 4.1 Recognise product imperfections and their causes
- 4.2 Determine, prioritise and implement remedial actions based on identified issues and causes
- 4.3 Accurately maintain records and logbooks
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAJ50 | PMBFIN202 | Fit attachments to products | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGP1 | PMB30121 | Certificate III in Polymer Processing | Qualification |
| BGP0 | PMB20121 | Certificate II in Polymer Processing | Qualification |