Unit of competency Outline

Date retreived
24/07/2026 1:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit attachments to products

Fit attachments to products

Unit of competency
National Code
PMBFIN202
State Code
BAJ50
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
26
Description
This unit of competency covers the skills and knowledge required to fit and test product attachments. This unit of competency applies to operators who are required to select the attachment and equipment to use, plan the sequence of tasks, inspect and test the completed work, and recognise routine and non-routine problems and take appropriate action. This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.This unit of competency applies to all sectors of the industry.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Establish requirements for the finishing process
  • 1.1 Interpret product specifications
  • 1.2 Identify availability of attachments, required materials and tools
  • 1.3 Identify final use and any special characteristics of the product to be assembled in relation to the impact of the assembly process on product quality
2 Plan fitting process
  • 2.1 Identify hazards connected with materials and process from observation of equipment and workplace reference materials
  • 2.2 Identify appropriate measures to minimise risks from the identified hazards
  • 2.3 Locate manufacturer's information and safety advice on products and use to plan work
  • 2.4 Plan attachment process to conform to quality specifications, minimise time and economically use materials
  • 2.5 Plan task sequences
  • 2.6 Assemble required materials, tools and facilities and check for suitability of purpose
3 Undertake finishing
  • 3.1 Follow work plan ensuring compliance with procedures
  • 3.2 Test attachments and product for conformity with quality requirements when required
  • 3.3 Inspect finished product and compare to specifications for suitability for further processing or for customer delivery
  • 3.4 Assemble finished products and sort in accordance with procedures
  • 3.5 Follow waste and recycling procedures
  • 3.6 Clean up work area and perform housekeeping
4 Identify and rectify routine product imperfections
  • 4.1 Identify the range of routine imperfections that can occur during the process
  • 4.2 Determine and rectify routine product imperfections in accordance with procedures
  • 4.3 Make sure appropriate records and log books are maintained to meet procedures
  • 4.4 Identify non-routine product imperfections and report to designated person
No information
No information
Replaces
State Code National Code Title Type
W7545 PMBFIN202C Fit attachments to products Unit of competency
Replaced By
State Code National Code Title Type
ODB57 PMBFIN202E Fit attachments and assemble components for customised polymer products Unit of competency